Compression moulding of carbon fibre sheet moulding compounds is an attractive
manufacturing method for composite structures. Investigating fibre orientation, defects and …

Since the composite components of civil aircraft have just entered the service stage, there is
not enough research on the failure analysis process and method of composite used in civil …

The aim of this study was to characterise the microstructural organisation of staple carbon
fibre-reinforced polymer composites and to investigate their mechanical properties …

Combinations of X-ray Computed Tomography (XCT) scan times, from 30 s to 60 min, and
voxel sizes, from 6 to 50 µm, were investigated for their effect on the porosity measurements …

An approach to detecting discontinuities in carbon fiber-reinforced polymers, caused by
impact loading followed by compression testing, was developed. An X-ray sensor-based …

Delamination in carbon fiber reinforced polymer (CFRP) composite structures plays a
significant role in reducing the stiffness and strength of the structure, thus downgrading the …

The properties of fiber reinforced polymers are strongly related to the length and orientation
of the fibers within the polymer matrix, the latter of which can be studied using X-ray …

复合材料在许多领域不断得到广泛应用, 结构形式越来越复杂, 尺寸越来越大,
对复合材料制件的质量要求愈来愈高, 因此, 对无损检测的准确性和可靠性要求越来越高 …

Conventional thermosetting composites exhibit advantageous mechanical properties owing
to the use of an autoclave; however, their wide usage is limited by high production costs and …

Composite materials used in the aviation industry are known to be more complex than their
metallic predecessors. This impacts not only the design and manufacturing of composite …