Here we proposed a new method to solve the difficulty existing in wire arc additive
manufacturing of Ni-Al intermetallic compounds (IMCs), ie, no welding wire available owing …

Double-wire plasma arc melting deposition was used to fabricated Ni–Al intermetallic
compounds by the optimization of feeding position of Ni and Al wires with big difference in …

In this study, Al based Al–3wt.% Fe, Al–3wt.% Cu and Al–3wt.% Ni alloys were prepared by
conventional casting. They were further processed using the melt-spinning technique and …

Abstract Addition of 2.8 wt.% Cu to an alumina-forming austenitic (AFA) stainless steel
promotes formation of a L1 2-ordered phase with the dominating elements Ni, Cu and Al …

Ni-Al intermetallic compounds from Ni and Al powder were obtained by thermal explosion.
Effects of molar ratio of Ni to Al in raw materials on the phases, microstructures and …

Copper (Cu) was introduced in the ZK60 alloy as a microalloying element. The
microstructure, thermal conductivity, and mechanical performance of ZK60-xCu (x= 0, 0.2 …

Rapidly solidified Al 100− x–Cu x alloys (x= 5, 10, 15, 25, 35 wt%) were prepared and
analyzed. High cooling rate increased the Cu solubility in α-Al matrix. The influence of the …

The shape of ceramic particles is one of the factors affecting the properties of metal matrix
composites. Exploring the mechanism of ceramic particles affecting the cooling mechanical …

Intermetallic compounds with special physical and chemical properties are considered to be
advanced materials. However, the brittleness at room temperature of intermetallic …

The deformation behavior and fracture characteristics of NiAl intermetallic alloy containing
5~ 7 at% Cu are investigated at room temperature under strain rates ranging from 1× 10− 3 …