Most industrial alloys contain a matrix phase and dispersed second-phase particles. Several
thermomechanical processing (TMP) steps are usually needed to produce a final product …

The microstructure and properties of the Cu-6.5 Fe-xMg (x= 0, 0.1, 0.3, 0.5 wt%) alloy were
investigated by TEM (transmission electron microscopy), EBSD (electron backscattered …

A systematic study of stacking fault energy (γ SF) resulting from induced alias shear
deformation has been performed by means of first-principles calculations for dilute Ni-base …

The effectiveness of the cryogenic (CT) rolling vis-à-vis room temperature (RT) rolling on
strengthening is significantly affected by stacking fault energy (SFE) and there is an optimum …

Abstract Cu-0.57 Cr-0.01 Ca and Cu-0.58 Cr-0.01 Sr (wt.%) alloys were fabricated and
processed by thermo-mechanical treatment. Their mechanical and electrical properties and …

In this paper, a series of Cu-3.2 Ni-0.6 Co-xSi-0.2 Cr-0.15 Mg (x= 0.62, 0.75, 0.92 and
1.09)(wt.%) alloys were fabricated and subjected to multi-step thermo-mechanical treatment …

Abstract A novel Cu-Cr-Yb alloy was designed and processed by thermo-mechanical
treatment. The microstructure, mechanical and electrical properties were investigated in …

Copper single-atom alloy catalysts (M@ Cu SAAs) have shown great promise for
electrochemical CO 2 reduction reaction (CO 2 RR). However, a clear understanding of the …

Ultrafine-grained materials produced by different severe plastic deformation methods show
very high strengths but their tensile ductility is often very low. In the present work, we …

Variations of energy, stress, and magnetic moment of fcc Ni as a response to shear
deformation and the associated ideal shear strength (τ IS), intrinsic (γ SF) and unstable (γ …