Fossil fuels are currently the dominant source of electricity and energy production around
the world. Biomass is one of the most referred renewable carbonaceous resource (s) that …

As drilling and blasting technique is applied in deep mining, its practical performance with
respect to rock fragmentation becomes a serious concern because high in-situ stress …

Numerous developments in additive manufacturing have endowed triply periodic minimal
surface (TPMS) structures with excellent mechanical properties, providing possibilities for …

This paper presents a peridynamics-based computational approach for modelling blasting
induced rock fractures. A new non-ordinary state-based peridynamics approach is proposed …

High in-situ stress can limit the generation of rock fractures induced by blasting, which
usually shows different states of rock fragmentation with those under low-stress conditions …

Understanding the behavior of rock under blast-and shock-induced loadings requires a high-
fidelity constitutive model. The present paper provides a detailed comparison study of three …

With the development of weapons, monolithic armor is hard to resist these threats.
Therefore, a SiC/TC4/UHMWPE laminates multi-layered composite armor against 7.62 mm …

In this paper, the Johnson-Holmquist concrete (JHC) constitutive model is adopted for
modeling and simulating the fracture of dolomite. A detailed step-by-step procedure for …

In this paper, the Johnson-Holmquist II (JH-2) model with parameters for a dolomite rock was
used for simulating rock fragmentation. The numerical simulations were followed by …

This paper attempts to study dolomite failure using small-scale blast tests. The experimental
setup consisted of a cylindrical specimen with a central borehole fitted with a detonation …