Integration of additive manufacturing (AM) with Cold spray process is the latest solid-state
supersonic deposition method that has gained significant attention of future manufacturing …

This paper summarizes our knowledge at the beginning of 2003 about splat formation. First,
the analytical and numerical models related to the impact and flattening of single particles …

Thermal spray is a continuous, directed, melt-spray process in which particles (eg, 1–50 μm
in diameter) of virtually any material are melted and accelerated to high velocities, through …

This paper is devoted to thermal spraying and presents the state of our current knowledge,
as well as the following research or development needs: spraying heat sources, ie, flame …

The suspension plasma spray (SPS) process was used to produce coatings from yttria-
stabilized zirconia (YSZ) powders with median diameters of 15 μm and 80 nm. The powder …

Quantitative microstructure characterization to better understand processing-microstructure-
property correlations is of considerable interest in plasma sprayed coating research. This …

For plasma sprayed thermal barrier coatings (TBCs), control of thermal conductivity is critical
since low thermal conductivity depends not only on the intrinsic property of the yttria …

A review is presented of how heat transfer takes place in plasma-sprayed (zirconia-based)
thermal barrier coatings (TBCs) during operation of gas turbines. These characteristics of …

The atmospheric plasma spraying of a yttria stabilized ZrO2 top-layer of a thermal barrier
coating (TBC) produces a complex microstructure consisting of a wide variety of cracks and …

Изложены основы теории и технологии производства железорудных окатышей.
Раскрыты проблемы техники и технологии окомкования железорудного сырья в …