The synergistic effects of Al3BC3–Al antioxidants on optimizing the oxidation resistance of
low‐carbon MgO–C refractories were investigated. The results indicated that the oxidation …

To solve the problem of the high cost of ZrN as a raw material, nanoscale c-ZrN powders
were synthesized by molten-salt nitridation at 1100° C and introduced into low-carbon MgO …

The experimental method that accurately assesses the responses of cementitious materials
with complex microstructures requires significant time and effort. To address this issue, a …

The annulus zone between the vertical ground heat exchanger and borehole wall needs to
be filled with grout to enhance heat exchange and prevent groundwater pollution. However …

Changing the water-to-cement ratio is one of the major ways to develop cement slurry with
different densities, which in turn will greatly affect the pore structure and mechanical …

The loss of well integrity in oil and gas and CO 2 injection wells provokes leaks that
potentially pollute underground water reservoirs and the surrounding environment. The …

Many simulation workflows require to prepare the data for the simulation manually. This is
time consuming and leads to a massive bottleneck when a large number of numerical …

The generation of high-quality volume meshes out of µCT data can be a challenging task
that is mandatory to perform CFD simulations of fluid flows within or around scanned objects …

Important functions of well cement are to provide zonal isolation behind casing strings and to
mechanically support and protect the casing. Experience suggests that many wells develop …

Tortuosity is an important parameter for characterizing the flow and transport properties of
porous material but impossible to be directly measured experimentally. This study aimed to …