This review article provides an in-depth discussion on the hot deformability, processing map
analysis, and microstructural development in superalloys, as well as the associated …

The precipitation behaviors of δ phases (Ni 3 Nb) in a nickel-based superalloy are
investigated by stress-free and stress aging tests. The effects of aging parameters on the …

The hot deformation behavior and microstructure were investigated for as-extruded 7005
alloys, which is the same as the billet state in real applications in the commercial forging …

Abstract In-situ (10 vol%) TiB/Ti–Al–4V composites were prepared by employing cold
isostatic pressing and vacuum sintering. The “pinning” effects of TiB whiskers on the hot …

This study investigates the hot deformation behavior of sintered Ti-5553 alloy with the
objective of providing a comprehensive description of its flow behavior, developing a …

GH4738 superalloy is a key material for gas turbine engines, yet its relatively poor
thermoplasticity and narrow temperature range for hot working deteriorate grain structure …

The flow behavior of metastable β titanium alloy was investigated basing on isothermal hot
compression tests performed on Gleeble 3800 thermomechanical simulator at near and …

Hot deformation behavior of 4130 steel and optimization of its processing parameters are
presented in this paper. Compression tests were performed at temperatures ranging from …

Shear-compression deformation (SCD) is more proper than uniaxial compression to
simulate the actual thermoforming with non-single strain modes. The flow behavior and …

The hot workability of Ni–25Cr–14W alloy is studied through isothermal hot compression
tests in the temperature (T) range of 1000–1200° C and in the strain rates (ε̇) of 0.001–10 …