Acid-resistant organic coatings for the chemical industry: a review

VB Møller, K Dam-Johansen, SM Frankær… - Journal of Coatings …, 2017 - Springer
Industries that work with acidic chemicals in their processes need to make choices on how to
properly contain the substances and avoid rapid corrosion of equipment. Certain organic …

Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings

A Günen, T Lindner, MS Karakaş, E Kanca… - Surface and Coatings …, 2022 - Elsevier
Laser-clad AlCrFeCoNi high entropy alloy (HEA) coatings, produced on the surface of AISI
316 L stainless steel, were pack-borided at 1000° C for 4 h in open air, high-purity Ar and …

Microstructure, some mechanical properties and tribocorrosion wear behavior of boronized Al0. 07Co1. 26Cr1. 80Fe1. 42Mn1. 35Ni1. 10 high entropy alloy

MS Karakaş, A Günen, C Çarboğa, Y Karaca… - Journal of Alloys and …, 2021 - Elsevier
High-entropy alloys (HEAs) with face-centered cubic (FCC) structures exhibit high
toughness and corrosion resistance, but their average strengths and relatively low wear …

Tribocorrosion behavior of boronized Co1. 19Cr1. 86Fe1. 30Mn1. 39Ni1. 05Al0. 17B0. 04 high entropy alloy

A Günen - Surface and Coatings Technology, 2021 - Elsevier
Boride layers were grown on the surface of a Co 1.19 Cr 1.86 Fe 1.30 Mn 1.39 Ni 1.05 Al
0.17 B 0.04 high-entropy alloy (HEA) by boronizing at temperatures of 900, 950 and 1000° C …

Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons

AG Arsha, E Jayakumar, TPD Rajan, V Antony, BC Pai - Materials & Design, 2015 - Elsevier
Engineering components with location specific properties are being designed and fabricated
successfully using functionally graded materials (FGM). The present investigation aims at …

Toughening of nanocomposite hard coatings

SK Mishra - Reviews on Advanced Materials Science, 2020 - degruyter.com
For engineering applications, hardness must be complimented with high toughness for
applications where high contact loads are there. A good combination of hardness …

[HTML][HTML] Improving the mechanical, thermoelectric insulations, and wettability properties of acrylic polymers: effect of silica or cement nanoparticles loading and plasma …

SI Hussein, SJ Kadhem, NA Ali, AM Alraih… - Polymers, 2024 - mdpi.com
The acrylic polymer composites in this study are made up of various weight ratios of cement
or silica nanoparticles (1, 3, 5, and 10 wt%) using the casting method. The effects of doping …

Experimental evaluation of bamboo fiber/particulate coconut shell hybrid PVC composite

AA Adediran, AA Akinwande, OA Balogun… - Scientific reports, 2021 - nature.com
Bamboo fibers (BF) treated in 1.3 Molar NaOH and particulate coconut shell (PCS) sieved
to− 45 µm were incorporated into polyvinyl chloride (PVC) matrix towards improving the …

Tribological performance of CrN and CrN/GLC coated components for automotive engine applications

S Wan, J Pu, D Li, B Zhang, AK Tieu - Journal of Alloys and Compounds, 2017 - Elsevier
Modern automotive systems strictly demands increased mechanical and thermal loads, a
longer service life and the weight reduction. Low friction hard coatings are extensively used …

Microstructure and tribomechanical properties of (Cr, N)-DLC/DLC multilayer films deposited by a combination of filtered and direct cathodic vacuum arcs

CQ Guo, ZL Pei, D Fan, J Gong, C Sun - Diamond and Related Materials, 2015 - Elsevier
Alternating multilayer diamond-like carbon (DLC) films [(Cr, N)-DLC/DLC] with different sp 3
contents in DLC layer have been prepared on YG8 (WC-Co) substrates by FCVA combined …