This article assesses the state-of-the-art for research on one-part alkali-activated materials,
with particular emphasis on recent work dealing with the constituent materials, preparation …

The manufacturing of geopolymers and alkali-activated materials for precast and cast in-situ
construction applications could be achieved using suitable production techniques, such as …

One-part geopolymer similar to conventional Portland cement by just adding water is a new
type of green cementitious material. Na 2 SiO 3-anhydrous is an excellent powder activator …

The aim of this study was to evaluate the drying shrinkage of one-part alkali-activated slag
concrete (AASC) for up to 180 days that is influenced by mix design parameters. A total of 24 …

The creation of one-part geopolymer mixtures is necessary to increase the economic
feasibility of geopolymers in practice. The utilization of extremely corrosive alkali solutions …

In this study, the use of desulphurization dust (DeS-dust) generated as a waste material
during steel-making process, as an alternative activator to commercial sodium hydroxide in …

This study aims to investigate the feasibility of preparing a one-part geopolymer using fly ash
(FA) and ground granulated blast furnace slag (GGBS) as the main raw materials and solid …

The key point of this investigation is to valorize CaCO 3-rich wood biomass ash (WBA) from
brick industry in the preparation of one-part white geopolymer cement (WGPC) using …

One-part geopolymer similar to conventional Portland cement by just adding water is a clean
cementitious material. Several commonly used activators include powdered sodium …

Because both fly ash with high unburned carbon particles and red mud are waste materials
with very low reuse rates, the reuse of these two waste materials is environmentally and …