Abstract Medium-manganese (Mn) steel (MMS) has remarkable characteristics of high
strength, strong work-hardening capacity, and wear resistance, being a promising third …

A novel strengthening strategy including warm rolling and intercritical annealing was
proposed to optimize the strength and ductility of a Fe–10.2 Mn–2.2 Al–0.41 C-0.6 V (wt.%) …

Plastic instability, including both the discontinuous yielding and stress serrations, has been
frequently observed during the tensile deformation of medium-Mn steels (MMnS) and has …

Hot compression tests were performed to investigate the hot deformation behavior of Fe-
27.34 Mn-8.63 Al-1.03 C lightweight steel and optimize the hot workability parameters. The …

The effect of Al content (0.035 wt%, 0.5 wt%, 1wt%, and 2wt%) on the composition change of
steel and slag as well as inclusion transformation of high manganese steel after it has …

The complex producing procedures and high energy-consuming limit the large-scale
production and application of advanced high-strength steels (AHSSs). In this study, the …

The application of microalloying technology has been emerging as an effective method to
enhance the strength-ductility synergy of high-strength hot-stamped steels, although the …

The influence of Nb-V microalloying on the hot deformation behavior and microstructures of
medium Mn steel (MMS) was investigated by uniaxial hot compression tests. By establishing …

The aim of the work was to determine the effect of Ti micro-addition on the hot tensile
behaviour, microstructure and fractography of two low-C high-manganese steels with …

Considering the precise composition control on the vacuum refining of high-Mn steel, the
behaviors of both Mn evaporation and nitrogen removal from molten Mn steel were …