Wear behavior of light-weight and high strength Fe-Mn-Ni-Al matrix self-lubricating steels
The good combination of mechanical and tribological properties for self-lubricating materials
is crucial. In this work, novel self-lubricating Fe-16.4 Mn-4.8 Ni-9.9 Al-xC (wt%) steels …
is crucial. In this work, novel self-lubricating Fe-16.4 Mn-4.8 Ni-9.9 Al-xC (wt%) steels …
Accelerated Spheroidization of Cementite in Sintered Ultrahigh Carbon Steel by Warm Deformation
P Nikiel, S Szczepanik, G Korpała - Metals, 2021 - mdpi.com
Evolution of microstructure and hardness in quenched ultrahigh carbon steel Fe-0.85 Mo-0.6
Si-1.4 C by warm compression on a Bähr plastometer-dilatometer at 775° C and at 0.001 to …
Si-1.4 C by warm compression on a Bähr plastometer-dilatometer at 775° C and at 0.001 to …
The effect of thermo-mechanical treatment on structure of ultrahigh carbon PM steel
P Nikiel, S Szczepanik, SJ Skrzypek… - Journal of Materials …, 2017 - Springer
The effects of thermo-mechanical treatment on selected properties related to the structure of
Fe-0.85 Mo-0.65 i-1.4 C powder metallurgy (PM) steel are reported. Three kinds of initial …
Fe-0.85 Mo-0.65 i-1.4 C powder metallurgy (PM) steel are reported. Three kinds of initial …
[PDF][PDF] Accelerated Spheroidization of Cementite in Sintered Ultrahigh Carbon Steel by Warm Deformation. Metals 2021, 11, 328
P Nikiel, S Szczepanik, G Korpała - 2021 - academia.edu
Evolution of microstructure and hardness in quenched ultrahigh carbon steel Fe-0.85 Mo-0.6
Si-1.4 C by warm compression on a Bähr plastometer-dilatometer at 775◦ C and at 0.001 to …
Si-1.4 C by warm compression on a Bähr plastometer-dilatometer at 775◦ C and at 0.001 to …
Novel Method for Refining Coarse Eutectic Carbides in Ultrahigh-Carbon Steel
Q Liu, F Wang, X Zhang, H Wang, J Li - Metal Science and Heat Treatment, 2020 - Springer
The structure and mechanical properties of an ultrahigh-carbon steel modified with
amorphous ferrosilicon with a low melting point are studied. The methods of x-ray diffraction …
amorphous ferrosilicon with a low melting point are studied. The methods of x-ray diffraction …
Новый метод измельчения грубых эвтектических карбидов в сверхвысокоуглеродистой стали
Л Цинсо, В Фан, Ч Синь, В Хуэйбинь… - Металловедение и …, 2019 - elibrary.ru
Исследованы структура и механические свойства сверхвысокоуглеродистой стали,
модифицированной аморфным ферросилицием с низкой точкой плавления. Методами …
модифицированной аморфным ферросилицием с низкой точкой плавления. Методами …
[PDF][PDF] Effects of Amorphous Modification on Microstructure and Mechanical Properties of Ultrahigh Carbon Steel Fe-1.89 C-1.50 Cr-0.33 Si-0.60 Mn
JM Li, QS Liu, F Wang, X Zhang - 2018 - scitepress.org
The ultra-high carbon steel with a carbon content close to the upper limit (1.89 wt.% C) was
modified by the amorphous rare earth (RE) calcium silicate modifier. Microstructure …
modified by the amorphous rare earth (RE) calcium silicate modifier. Microstructure …