Review of BiScO3-PbTiO3 piezoelectric materials for high temperature applications: fundamental, progress, and perspective
Y Dong, K Zou, R Liang, Z Zhou - Progress in Materials Science, 2023 - Elsevier
Abstract BiScO 3-PbTiO 3 (BS-PT) system has been extensively investigated over two
decades since the discovery in 2001 for its high piezoelectric coefficient and high Curie …
decades since the discovery in 2001 for its high piezoelectric coefficient and high Curie …
Recent progress in bismuth-based high Curie temperature piezo-/ferroelectric perovskites for electromechanical transduction applications
Z Liu, H Wu, Y Yuan, H Wan, Z Luo, P Gao… - Current Opinion in Solid …, 2022 - Elsevier
Piezo-/ferroelectric materials with high Curie temperature (TC) are widely needed in
sensors, actuators and transducers which can be used for high-temperature (HT) …
sensors, actuators and transducers which can be used for high-temperature (HT) …
Neutron Powder Diffraction Study on the Crystal and Magnetic Structures of BiCoO3
The crystal and magnetic structures of polycrystalline BiCoO3 have been determined by the
Rietveld method from neutron diffraction data measured at temperatures from 5 to 520 K …
Rietveld method from neutron diffraction data measured at temperatures from 5 to 520 K …
Predicting morphotropic phase boundary locations and transition temperatures in Pb-and Bi-based perovskite solid solutions from crystal chemical data and first …
Using data obtained from first-principles calculations, we show that the position of the
morphotropic phase boundary (MPB) and transition temperature at MPB in ferroelectric …
morphotropic phase boundary (MPB) and transition temperature at MPB in ferroelectric …
Manganese-modified BiScO3–PbTiO3 piezoelectric ceramic for high-temperature shear mode sensor
The bismuth-based perovskite solid solution (100− x) Bi Sc O 3− x Pb Ti O 3 (BSPT) was
investigated for use at temperatures up to 400 C and above. The high-temperature …
investigated for use at temperatures up to 400 C and above. The high-temperature …
High-Pressure Synthesis, Crystal Structures, and Properties of Perovskite-like BiAlO3 and Pyroxene-like BiGaO3
AA Belik, T Wuernisha, T Kamiyama, K Mori… - Chemistry of …, 2006 - ACS Publications
New oxides, BiAlO3 and BiGaO3, were prepared using a high-pressure high-temperature
technique at 6 GPa and 1273− 1473 K. BiAlO3 is isotypic with multiferroic perovskite-like …
technique at 6 GPa and 1273− 1473 K. BiAlO3 is isotypic with multiferroic perovskite-like …
Predicting the position of the morphotropic phase boundary in high temperature PbTiO3-Bi (B′ B ″) O3 based dielectric ceramics
MR Suchomel, PK Davies - Journal of Applied Physics, 2004 - pubs.aip.org
Over the last half century, ceramics based on the PbZr (1− x) Ti (x) O3 (PZT) perovskite
system have come to dominate the market of ferroelectric and piezoelectric ceramics. The …
system have come to dominate the market of ferroelectric and piezoelectric ceramics. The …
Elastic, piezoelectric, and dielectric characterization of modified BiScO/sub 3/-PbTiO/sub 3/ceramics
The perovskite solid solution system (1-x) BiScO/sub 3/-(x) PbTiO/sub 3/represents an
interesting new family of high-temperature piezoelectric materials. Compositions near the …
interesting new family of high-temperature piezoelectric materials. Compositions near the …
First-principles study of the cubic perovskites (, Ga, In, and Sc)
We systematically investigated the structure, electronic properties, zone-center phonon
modes, and structure instability of four cubic perovskite Bi MO 3 compounds, with three of …
modes, and structure instability of four cubic perovskite Bi MO 3 compounds, with three of …
Structural and Dielectric Properties of Bi (Mg1/2Ti1/2)O3–BaTiO3 Lead‐Free Ceramics
By the conventional mixed oxide method (1− x) Bi (Mg1/2Ti1/2) O3–xBaTiO3 ((1− x) BMT–
xBT, x= 0.2− 1.0) ceramics were prepared. For x≤ 0.4, a bismuth‐rich phase was observed …
xBT, x= 0.2− 1.0) ceramics were prepared. For x≤ 0.4, a bismuth‐rich phase was observed …