High-energy mechanical milling was used to reduce the size and mix Cu and W powders.
Extruded cylindrical preforms with theoretical density of 93% were prepared using a die and …

In this paper the effect of cryorolling on tensile and forming behaviour of aluminium alloy
(AA) 5052 sheets has been investigated and compared with room temperature rolling of the …

The wear behaviour of Cr3C2-25% NiCr laser alloyed nodular cast iron sample were
analyzed using a pin-on-disc tribometer. The influence of sliding velocity, temperature and …

This study considers the tensile properties, formability limit strain and void coalescence
parameters of the commercially available aluminium alloy sheets in metal forming processes …

In the present work, an experimental study was made to identify formability characteristics of
aluminum 6061 fiction stir welded blank in an incremental forming process. Forming limit …

The wear behavior of untreated and WC-12% Co laser alloyed nodular cast iron samples
were analyzed using a high temperature pin-on-disc tribometer. Response surface …

The formability of the austenitic grade of low Ni‐treated steels (SSLNA) was examined by
metal turning measure. The treated steel items are considered for choice as prepared with …

In this work, a combined forming and fracture limit diagram, fractured void coalescence and
texture analysis have been experimentally evaluated for the commercially available …

This paper deals with the combined analysis of the forming and the fracture limit diagrams
and the void coalescence for AA 6061 sheets that were rolled up to a 50% reduction at two …

This paper deals with a combined forming and fracture limit diagram and void coalescence
analysis for the aluminum alloy Al 1145 alloy sheets of 1.8 mm thickness, annealed at four …