Enhanced morphology-dependent tensile property and breakdown strength of impact polypropylene copolymer for cable insulation

K Yang, Y Liu, Z Yan, Y Tian, Y Liu, Z Jing, J Li, S Li - Materials, 2020 - mdpi.com
The decrease in electrical properties caused by the toughening of polypropylene (PP) is a
difficult problem for the modification of PP used for cable insulation. In this research, an …

乙烯共聚调控晶态结构对聚丙烯电缆绝缘料电气性能的影响

杨凯, 任颙若, 李建英, 景政红, 欧阳本红, 赵鹏 - 高电压技术, 2022 - epjournal.csee.org.cn
为了揭示乙烯共聚对聚丙烯电缆绝缘电气性能的影响机制, 通过2 阶段抗冲共聚工艺合成了3
种不同乙烯− 丙烯共聚物(ethylene-propylene copolymer, EPR) 含量的抗冲共聚聚丙烯(impact …

Study on the fracture toughness and deformation micro-mechanisms of PP/EPDM/SiO2 ternary blend-nanocomposites

S Hajibabazadeh, MK Razavi Aghjeh… - Journal of …, 2020 - journals.sagepub.com
A detailed fracture analysis of polypropylene/ethylene–propylene–diene monomer
rubber/nano-silica (PP/EPDM/SiO2) ternary blend-nanocomposites was conducted through …

The optimization of mechanical properties of polypropylene/styrene butadiene rubber/silicon carbide nanocomposites using response surface methodology

M Hajibeigi, MR Nakhaei, A Rahi… - Polymer Engineering & …, 2024 - Wiley Online Library
Polypropylene is a useful and widely consumed thermoplastic with very good properties that
can be mixed with a combination of rubber and nanoparticles in order to eliminate its …

[HTML][HTML] Reinforcement of PP with polymer fibers: Effect of matrix characteristics, fiber type and interfacial adhesion

R Várdai, T Lummerstorfer, C Pretschuh, M Jerabek… - Polymer, 2020 - Elsevier
Two polypropylene polymers with considerably differing properties were modified with poly
(ethylene terephthalate)(PET) and poly (vinyl alcohol)(PVA) fibers. Fiber content changed …

Effects of fumed silica and draw ratio on nanocomposite polypropylene fibers

L Fambri, I Dabrowska, R Ceccato, A Pegoretti - Polymers, 2017 - mdpi.com
Hydrophylic fumed silica AR974 was tested as a potential nanofiller for the production of
composite isotactic polypropylene filaments/fibers (containing 0.25–2 vol% of nanoparticles) …

Quantifying effect of inorganic filler geometry on the structural, rheological and viscoelastic properties of polypropylene-based thermoplastic elastomers

MB Alanalp, A Durmus, I Aydin - Journal of Polymer Research, 2019 - Springer
In this study, polypropylene-based thermoplastic elastomer compounds (TPEs) were
formulated by using isotactic polypropylene (i-PP), poly (styrene-b-ethylene/butylene-b …

Surface modification of sepiolite: Effects on thermomechanical properties of PP/PA6 blends

K Wang, J Xie, T Li, X Wu, W Huang, Q Tian… - Journal of Polymer …, 2020 - Springer
In the current work, organosepiolite (O-Sep) was prepared via modification of sepiolite (Sep)
with silane coupler γ-methacryloxypropyltrimethoxysilane (CG-570) and polypropylene …

Miscibility and rigid amorphous phase in blends of polypropylene with poly (propylene‐co‐ethylene)

MH Darweesh, SH El‐Taweel… - Journal of Applied …, 2022 - Wiley Online Library
Thermal and mechanical properties of binary blends of polypropylene (PP) with a statistical
copolymer (85 wt% propylene and 15 wt% ethylene, abbreviated here as VM) have been …

Effect of organophilic clay addition on properties of SAN/EPDM blends

Z Benneghmouche, D Benachour - Composite Interfaces, 2019 - Taylor & Francis
In rubber-toughened mixtures, the rubber is intended to dissipate the stress so that the blend
shows ductility and plastic deformation. But poor interfacial adhesions, high interfacial …