Magnesium (Mg) alloys have received an increasing interest in the past two decades for
their tremendous application potential. The strength and corrosion resistance levels of …

Higher strength is always the goal pursued by researchers for the structural materials,
especially for the lightweight magnesium (Mg) alloys which generally have relatively low …

To further expand the application of magnesium (Mg) alloys, development of the high
strength Mg-rare earth (RE) alloys is strongly desired. The strength of the Mg alloys can be …

The effects of heat treatment before extrusion on the dynamic recrystallization (DRX)
behavior, texture, and mechanical properties of the extruded Mg-9.8 Gd-3.5 Y-2.0 Zn-0.4 Zr …

The effect of Ca and Zn in solid solution on the critical resolved shear stress (CRSS) of basal
slip, tensile twinning and pyramidal slip in Mg alloys has been measured through …

The microstructural features of long period stacking ordered (LPSO) phase in Mg–(11-x) Gd–
xY–1Zn–0.3 Zr (wt.%) alloys were optimized by adjusting Gd/Y ratios to10: 1, 8: 3, 6: 5, 4: 7 …

This paper investigated the effects of Gd and Y solutes on aging behaviour and
corresponding mechanical properties of the extruded Mg–Gd (-Y)-Zn-Mn alloys at room and …

Abstract Analysis and design of materials and fluids requires understanding of the
fundamental relationships between structure, composition, and properties. Dislocations and …

The mechanical properties of the Mg-based LPSO-phase are expected to be strongly
affected by the microstructure due to its anisotropic crystal structure. However, the fine …

A gradient nanostructured surface layer was formed in an Al–4 wt% Cu alloy processed by
means of surface mechanical grinding treatment at liquid nitrogen temperature. Within the …