As metallic additive manufacturing grew in sophistication, users have requested greater
control over the systems, namely the ability to fully change the process parameters. The goal …

Titanium and nickel based alloys possess excellent properties and are found wide
applications in producing aerospace components. Welding of these superalloys has always …

Dissimilar autogenous welding of ferritic/martensitic P92 steel and Inconel 617 alloy was
conducted using the laser beam-welding process. The microstructure evolution such as …

Abstract Welding of Inconel 617 (IN617) alloy and austenitic 304L SS steel has been
attempted using the autogenous Laser Beam Welding (LBW) process. Characterization of …

Dissimilar joining of advanced engineering alloys is fundamental for the development of
new applications. However, joining two distinct materials poses difficulties owing to the …

Multi-pass narrow-gap welding of thick Inconel 617 plate was conducted with YLS-10000
fiber laser. The influence of different welding parameters on the joint geometry and defects …

This research article addresses about the joining of 4 mm thick plates of Inconel 718 and
ferritic stainless steel (SS) 316L by Tungsten Inert Gas (TIG) welding process without using …

In this study, welding of Superalloy Inconel 625 and duplex stainless steel 2205 (DSS 2205)
has been successfully performed through Ytterbium fiber laser at different heat inputs. With …

In these days, laser is a useful and valuable tool. Low input heat, speed, accuracy, and high
controllability of laser welding have led to widespread use in various industries. Nickel …

Inconel 617 Ni-based superalloy sheets were joined using a laser-welding process. The
welding experiments were conducted on four different welding positions (ie, flat, horizontal …