Evolution of acoustic softening effect on ultrasonic-assisted micro/meso-compression behavior and microstructure
The application of ultrasonic vibration is an effective method to overcome the processing
problems in micro/meso-forming. Previously it was observed that ultrasonic vibration could …
problems in micro/meso-forming. Previously it was observed that ultrasonic vibration could …
Evolution of Ti2Ni precipitations during annealing and their effects on properties of Ti–Nb–Ni foil as PEMFC bipolar plates substrate
H Zhu, X Wang, W Meng, P Ming, F Kong - International Journal of …, 2023 - Elsevier
Abstract In this work, Ti–Nb–Ni foil was cold rolled and different annealing temperatures
were conducted. For foils annealed at 600° C, 650° C and 700° C, Ti 2 Ni particles were …
were conducted. For foils annealed at 600° C, 650° C and 700° C, Ti 2 Ni particles were …
Constitutive modeling of multiscale polycrystals considering grain structures and orientations
JY Zheng, JQ Ran, MW Fu - International Journal of Mechanical Sciences, 2022 - Elsevier
Traditional macro-scaled plasticity theories may not be fully valid and accurate in study of
meso-/micro-scaled deformation due to the existence of size effects (SEs). In …
meso-/micro-scaled deformation due to the existence of size effects (SEs). In …
Understanding the role of water-based nanolubricants in micro flexible rolling of aluminium
To comprehend the role of water-based nanolubricant in micro flexible rolling,
corresponding characterisation with respect to different concentrations of nanolubricants …
corresponding characterisation with respect to different concentrations of nanolubricants …
The mean stress and phase angle effect on multiaxial fatigue behavior of a TiAl alloy: Failure analysis and life modeling
Q Zhang, X Hu, Z Zhang, T Sun, J Wu, Y Li… - International Journal of …, 2021 - Elsevier
In the presence of multiaxial fatigue loadings with multiple loading variables, fatigue
behavior of material differs from those under in-phase (IP) multiaxial fatigue loadings. The co …
behavior of material differs from those under in-phase (IP) multiaxial fatigue loadings. The co …
[PDF][PDF] 钛板微成形断裂尺度效应及细观损伤准则
徐竹田， 孙磊， 姜天豪， 彭林法， 来新民 - 机械工程学报, 2022 - qikan.cmes.org
设计开展了钛薄板拉伸断裂的尺度效应试验, 发现随着晶粒增大, 延伸率, 断裂极限应力均显著
下降. 通过扫描电镜对断面进行观测发现, 随晶粒增大断面由典型密集韧窝断面向河流状解理 …
下降. 通过扫描电镜对断面进行观测发现, 随晶粒增大断面由典型密集韧窝断面向河流状解理 …
A multiscale constitutive model coupled with martensitic transformation kinetics for micro-scaled plastic deformation of metastable metal foils
The mechanical behavior of metastable austenitic foils at the size scale from micron to
submillimeter is strongly affected by the coupling between size effect and strain-induced …
submillimeter is strongly affected by the coupling between size effect and strain-induced …
Mechanical and micro-structural characterization of hot rolled brass foil
To assist the large-scale production of micro parts by micro sheet metal forming processes,
mechanical and microstructural behaviors of metal foils are required. In the present study, an …
mechanical and microstructural behaviors of metal foils are required. In the present study, an …
Evolution of bulk compressibility and permeability of granite due to thermal cracking
F Zhang, J Zhao, D Hu, J Shao, Q Sheng - Geotechnique, 2019 - icevirtuallibrary.com
Granite samples were subjected to heating at different temperatures and rapid water
cooling. Hydrostatic compression tests were performed on the thermally treated samples …
cooling. Hydrostatic compression tests were performed on the thermally treated samples …
Effect of stress ratio on high cycle fatigue behavior of TNM‐TiAl alloy
G Sun, R Cao, X Zhou, XX Jiang… - Fatigue & Fracture of …, 2022 - Wiley Online Library
In order to investigate the effect of stress ratio on room temperature high‐cycle fatigue life of
Ti‐43.5 Al‐4Nb‐1Mo‐0.1 B alloy, high‐cycle fatigue life test of TNM‐TiAl alloy at stress ratio …
Ti‐43.5 Al‐4Nb‐1Mo‐0.1 B alloy, high‐cycle fatigue life test of TNM‐TiAl alloy at stress ratio …