Bioactive glass coatings: a review

A Sola, D Bellucci, V Cannillo… - Surface …, 2011 - journals.sagepub.com
Bioactive glasses, discovered by Hench and co-workers at the end of the 1960s, are among
the most promising biomaterials for bone repair and reconstruction, mainly thanks to their …

Enlargement of halloysite clay nanotube lumen by selective etching of aluminum oxide

E Abdullayev, A Joshi, W Wei, Y Zhao, Y Lvov - ACS nano, 2012 - ACS Publications
Halloysite clay tubes have 50 nm diameter and chemically different inner and outer walls
(inner surface of aluminum oxide and outer surface of silica). Due to this different chemistry …

Agricultural waste as a source for the production of silica nanoparticles

V Vaibhav, U Vijayalakshmi, SM Roopan - Spectrochimica acta part A …, 2015 - Elsevier
The major interest of the paper deals with the extraction of silica from four natural sources
such as rice husk, bamboo leaves, sugarcane bagasse and groundnut shell. These waste …

Fabrication and characterization of chitosan/gelatin/nSiO2 composite scaffold for bone tissue engineering

KC Kavya, R Jayakumar, S Nair… - International journal of …, 2013 - Elsevier
A 3D nanocomposite scaffold of chitosan, gelatin and nano-silica was fabricated by
lyophilization to test the hypothesis that incorporation of nano-SiO2 could produce a better …

Preparation and evaluation of the cytotoxic nature of TiO2 nanoparticles by direct contact method

M Chellappa, U Anjaneyulu… - International journal …, 2015 - Taylor & Francis
The purpose of this study is to prepare and evaluate the effect of synthesized titanium
dioxide (TiO2) nanoparticles for their biocompatibility on physiological body fluids and the …

Sol-gel synthesis and characterizations of hybrid chitosan-PEG/calcium silicate nanocomposite modified with ZnO-NPs and (E102) for optical and antibacterial …

AM Youssef, AM El-Nahrawy… - International Journal of …, 2017 - Elsevier
Abstract Hybrid Chitosan/Poly ethylene glycol/calcium silicate (CS/PEG/calcium silicate)
nanocomposite modified with different two types, zinc oxide nanoparticles (ZnO-NPs) and …

A Systematic Review of the Contribution of Additive Manufacturing toward Orthopedic Applications

A Joseph, V Uthirapathy - ACS omega, 2024 - ACS Publications
Human bone holds an inherent capacity for repairing itself from trauma and damage, but
concerning the severity of the defect, the choice of implant placement is a must. Additive …

Functionalization of halloysite nanotubes for the preparation of carboxymethyl cellulose-based nanocomposite films

LF Wang, JW Rhim - Applied Clay Science, 2017 - Elsevier
Halloysite nanotubes (Hal) were treated with acid to prepare uniformly charged acid treated
Hal (Hal-A). After acid treatment, the surface charge (zeta potential) of Hal changed from+ …

Polyethylene glycol infused acid-etched halloysite nanotubes for melt-spun polyamide-based composite phase change fibers

H Xiang, J Zhou, Y Zhang, MT Innocent, M Zhu - Applied Clay Science, 2019 - Elsevier
The unique tubular structure and morphology of inorganic nanotubes makes them very
useful supporting materials for thermal energy storage. Lending these properties in the form …

Preparation and characterization of La (III) encapsulated silica gel/chitosan composite and its metal uptake studies

MR Gandhi, S Meenakshi - Journal of hazardous materials, 2012 - Elsevier
Lanthanum loaded silica gel/chitosan composite (LaSiCS) was prepared by mixing silica
gel, LaCl3· 7H2O and chitosan which was then cross-linked with glutaraldhyde. The LaSiCS …