To promote the utilization of hydrogen (H 2) in existing gas turbines, dimethyl ether (DME)
was used to co-fire with H 2 in a model combustor. The swirl combustion characteristics of …

The present review describes the current achievements in the applications of a planar laser-
induced fluorescence (PLIF) method for the diagnostics of liquid films, bubbles, individual …

To improve the combustion intensity of biogas which is a renewable gas turbine fuel with
methane (CH 4) and CO 2 as major components, dimethyl ether (DME, CH 3 OCH 3) was …

The present paper reports on the investigation of turbulent transport and fuel mixing under
nonreacting conditions for a model gas-turbine swirl burner based on a design by …

Cofiring with hydrogen presents a reasonable approach to achieve enhanced ammonia (NH
3) combustion without introducing an extra carbon footprint. A promising strategy for NH 3/H …

The combustor and turbine inlet pressures of modern aviation and power-generation gas
turbine engines can vary between 30 and 50 bar. Innovative diagnostic methods are needed …

Dimethyl ether (DME) is a promising alternative fuel for gas turbines, considering its
renewable nature and potential for large-scale synthesis from CO 2 feedstock. However …

The present paper compares the flow structure and flame dynamics during combustion of
methane and syngas in a model gas-turbine swirl burner. The burner is based on a design …

In this work, we further developed the planar temperature measurement method based on
thermally assisted laser-induced fluorescence (TALF) with a single femtosecond (fs) laser …

The present experimental work reports on the temperature measurements in a Bunsen
flame, covered by a flat cooled plate from the top. The temperature field is measured based …