This review is dedicated to electronics materials enabling thin‐film‐based neural interface
and bioelectronics devices. First‐generation bioelectronic medicine devices feature hand …

Abstract Wire-and-Arc Additively Manufactured (WAAM) alloys are characterized by specific
mechanical properties which can largely differ from the conventionally-manufactured alloys …

In this paper, we present a comparative study of tribological properties of TiN coatings
deposited by low-voltage electron beam evaporation, magnetron sputtering and cathodic arc …

We describe a duplex nitriding and TiAlN coating process performed with no break in
vacuum in an industrial scale deposition chamber. Plasma nitriding at 480° C resulted in a …

Ti and TiN thin films (50–140 nm thick) are grown by dc reactive magnetron sputtering PVD
in an inverted cylindrical magnetron (ICM) thanks to an original industrial process …

In this work, we have combined a conventional pulsed laser deposition (PLD) system with a
dual radio frequency (RF) discharge to create a plasma-enhanced PLD system, known as …

The purpose of duplex surface engineering involves a sequential application of two surface
technologies in order to develop a surface with combined properties. Duplex treatments …

In this work, two types of transition layers (pure Cr and gradient CrN x) were fabricated
between plasma-assisted nitrided (PAN) stainless steel and magnetron sputtering CrN …

The present investigation reports the modification of Ti substrates by a plasma technique to
enhance their physio-chemical properties as biocompatible substrates for the deposition of …

In this study, the effect of deep cryogenic treatment (DCT) on PVD-TiN coated AISI M2 high
speed steel was investigated. DCT has been cited to improve hardness, toughness, and …