Optimized Phase and Crystallinity of Cr2(NCN)3 Dominating Electrochemical Lithium Storage Performance
H Li, F Wu, P Guo, S Zhao, M Qian, C Yu, N Yang… - Nano Letters, 2024 - ACS Publications
Cr2 (NCN) 3 is a potentially high-capacity and fast-charge Li-ion anode owing to its
abundant and broad tunnels. However, high intrinsic chemical instability severely restricts its …
abundant and broad tunnels. However, high intrinsic chemical instability severely restricts its …
A comparison of the oxidation behavior of CrN films deposited using continuous dc, pulsed dc and modulated pulsed power magnetron sputtering
J Lin, N Zhang, WD Sproul, JJ Moore - Surface and Coatings Technology, 2012 - Elsevier
The study is aimed at comparing the oxidation behavior of the stoichiometric CrN films
deposited by continuous dc magnetron sputtering (dcMS), mid-frequency pulsed dc …
deposited by continuous dc magnetron sputtering (dcMS), mid-frequency pulsed dc …
Thermally Controlled Synthesis of Cr2(NCN)3/CrN Heterostructured Composite Anodes for High‐Performance Li‐Ion Batteries
H Li, P Guo, J Wang, S Zhao, M Yang, X Liu… - Batteries & …, 2024 - Wiley Online Library
Abstract Cr2 (NCN) 3 features high specific capacity and fast electrical conductivity, making
it a promising anode candidate for Li‐ion batteries. However, inherent chemical and …
it a promising anode candidate for Li‐ion batteries. However, inherent chemical and …
Effect of sputtering pressure and temperature on DC magnetron sputtered CrN films
Chromium nitride thin films were deposited on Si (100) substrate by using DC magnetron
sputtering and the influence of process parameters such as substrate temperature, pressure …
sputtering and the influence of process parameters such as substrate temperature, pressure …
Weibull modulus of nano-hardness and elastic modulus of hydroxyapatite coating
A Dey, AK Mukhopadhyay, S Gangadharan… - Journal of Materials …, 2009 - Springer
Here we report the microstructural dependence of nano-hardness (H) and elastic modulus
(E) of microplasma sprayed (MIPS) 230 μm thick highly porous, heterogeneous …
(E) of microplasma sprayed (MIPS) 230 μm thick highly porous, heterogeneous …
High emissivity coatings on titanium alloy prepared by micro-arc oxidation for high temperature application
H Tang, Q Sun, CG Yi, ZH Jiang, FP Wang - Journal of Materials Science, 2012 - Springer
Micro-arc oxidation coatings were prepared on Ti6Al4V alloy in Na 3 PO 4-based electrolyte
with different additives such as FeSO 4, Co (CH 3 COO) 2, Ni (CH 3 COO) 2, and K 2 ZrF 6 …
with different additives such as FeSO 4, Co (CH 3 COO) 2, Ni (CH 3 COO) 2, and K 2 ZrF 6 …
Structural, mechanical, and tribological properties of AISI 304 and AISI 316L steels submitted to nitrogen–carbon glow discharge
FC Nascimento, CM Lepienski, CE Foerster… - Journal of materials …, 2009 - Springer
Glow discharge (GD) nitrocarburizing, at low-carbon content and different working
temperatures, was performed on AISI 316L and AISI 304 stainless steels. Structural …
temperatures, was performed on AISI 316L and AISI 304 stainless steels. Structural …
Microstructural characterizations and hardness evaluation of dc reactive magnetron sputtered CrN thin films on stainless steel substrate
Chromium nitride (CrN) thin films were deposited on stainless steel (grade: SA304)
substrate by using dc reactive magnetron sputtering and the influence of process …
substrate by using dc reactive magnetron sputtering and the influence of process …
Mechanical, microstructural and oxidation properties of reactively sputtered thin CrN coatings on steel
R Cecchini, A Fabrizi, M Cabibbo, C Paternoster… - Thin Solid Films, 2011 - Elsevier
Abstract Thin (40 nm and 160 nm) Crsingle bond N coatings were deposited on steel by
reactive magnetron sputtering deposition, varying the N 2 flow. The coatings were …
reactive magnetron sputtering deposition, varying the N 2 flow. The coatings were …
Preparation and crystal structure of ζ-Cr2(C,N) powders
S Ma, Y Liu, J Ye, L Xie - Journal of Materials Science, 2019 - Springer
In this work, the influence parameters, including synthesis temperature, nitrogen pressure,
and isothermal dwell time, were systematically investigated during carbothermal preparation …
and isothermal dwell time, were systematically investigated during carbothermal preparation …