[图书][B] High nitrogen steels: structure, properties, manufacture, applications
VG Gavriljuk, H Berns - 1999 - books.google.com
Basic research and new manufacturing methods have led to high nitrogen steels (HNS), a
promising new group of materials for use in advanced applications in mechanical and …
promising new group of materials for use in advanced applications in mechanical and …
Nitrogen in iron and steel
VG Gavriljuk - ISIJ international, 1996 - jstage.jst.go.jp
Ashort review of beneficial effects of nitrogen in steel is given including mechanical and
corrosion properties, and the data of interatomic interactions and distribution of solute atoms …
corrosion properties, and the data of interatomic interactions and distribution of solute atoms …
Local interactions in carbon-carbon and carbon-M (M: Al, Mn, Ni) atomic pairs in FCC gamma-iron
K Oda, H Fujimura, H Ino - Journal of Physics: Condensed Matter, 1994 - iopscience.iop.org
Abstract Mossbauer spectra of Fe-8.0 at.% C, Fe-10.9 at.% Al-8.2 at.% C, Fe-1.4 at.% Mn-7.9
at.% C, Fe-2.4 at.% Mn-7.8 at% C and Fe-14.6 at.% Ni-6.2 at.% C FCC gamma-irons have …
at.% C, Fe-2.4 at.% Mn-7.8 at% C and Fe-14.6 at.% Ni-6.2 at.% C FCC gamma-irons have …
Interaction and arrangement of nitrogen atoms in FCC γ-iron
K Oda, K Umezu, H Ino - Journal of Physics: Condensed Matter, 1990 - iopscience.iop.org
A Mossbauer effect measurement of 57 Fe has been performed for the Fe-N austenite in
order to study the interaction between nitrogen atoms and the distribution among the …
order to study the interaction between nitrogen atoms and the distribution among the …
Strain induced martensite formation in stainless steel
DC Cook - Metallurgical and Materials Transactions A, 1987 - Springer
Abstract The Conversion Electron and X-ray Mössbauer studies of the surface of Type 316
stainless steel at 400 K, 300 K, and 100 K show that both the substitutional and interstitial …
stainless steel at 400 K, 300 K, and 100 K show that both the substitutional and interstitial …
Effect of carbon and nitrogen on the stacking fault energy of high-alloyed iron-based austenite
YN Petrov - International Journal of Materials Research, 2022 - degruyter.com
The dependence of stacking fault energy (SFE) on the carbon and nitrogen content in iron-
based high-alloyed austenite has been thermodynamically calculated and compared with …
based high-alloyed austenite has been thermodynamically calculated and compared with …
Effect of carbon and nitrogen on chemical homogeneity of fcc iron-based alloys
VG Gavriljuk, AL Sozinov, AG Balanyuk… - … Materials Transactions A, 1997 - Springer
Iron-based fcc alloys containing (at. pct) 18 Cr, 15Ni, 10Mn and 18Cr, 15Ni were additionally
alloyed with either carbon or nitrogen and studied by the small angle scattering of thermal …
alloyed with either carbon or nitrogen and studied by the small angle scattering of thermal …
Precipitation during tempering of chromium-rich iron-based martensite alloyed with carbon and nitrogen
H Berns, VA Duz, R Ehrhardt, VG Gavriljuk… - International Journal of …, 2021 - degruyter.com
The structure and properties of iron-based Cr15Mo l martensite with about 0.3 wt.% C and N
each are studied after tempering at 200 to 650° C by means of hardness measurements …
each are studied after tempering at 200 to 650° C by means of hardness measurements …
Atomistic simulation of thermally activated glide of dislocations in Fe Ni Cr N austenite
M Grujicic, XW Zhou - Materials Science and Engineering: A, 1995 - Elsevier
Thermally activated glide of edge and screw dislocations with the Burgers vector b= a/2〈
110〉 in Fe Ni Cr austenite without and with nitrogen has been analyzed using the …
110〉 in Fe Ni Cr austenite without and with nitrogen has been analyzed using the …
Mössbauer analysis of the effect of substitutional atoms on the electronic charge distribution in nitrogen and carbon austenites
VM Nadutov - Materials Science and Engineering: A, 1998 - Elsevier
The isomeric shifts and quadrupole splitting of lines in Mössbauer spectra of alloyed Fe–Mn–
N (C), Fe–Mn–Cr–N (C), Fe–Ni–N (C) and Fe–Mn–Cr–Ni–N (C) austenites were analyzed in …
N (C), Fe–Mn–Cr–N (C), Fe–Ni–N (C) and Fe–Mn–Cr–Ni–N (C) austenites were analyzed in …