Effect of tool pin shapes on microstructure and mechanical behaviour of friction stir welding of dissimilar aluminium alloys
The mechanical and microstructure characterizations of friction stir welding (FSW) joints of
5052-H32 with 6061-T6 aluminium alloys (AA) were investigated in this research. With two …
5052-H32 with 6061-T6 aluminium alloys (AA) were investigated in this research. With two …
[HTML][HTML] Research on friction performance of friction stir welding tools based on non-smooth structure
Y Li, Y Huangfu, J Feng, L Tian, L Ren - Biomimetics, 2024 - ncbi.nlm.nih.gov
In this study, based on the principles of bionics, we fabricated a bionic non-smooth concave
pit structure on the shoulders of friction stir welding tools and detected the thermal cycling …
pit structure on the shoulders of friction stir welding tools and detected the thermal cycling …
Investigation of mechanical, metallurgical and corrosion characteristics of friction stir welded dissimilar AA 5052-H32 and AA 6061-T6 joints
S Balamurugan, K Jayakumar… - Journal of the Chinese …, 2023 - Taylor & Francis
Welding is used for fabricating various components to increase the application of aluminum
alloys. When compared to fusion welding, friction stir welding (FSW) is used to join non …
alloys. When compared to fusion welding, friction stir welding (FSW) is used to join non …
[HTML][HTML] Effect of Vibration Frequency on Mechanical Properties and Microstructure of Metal Inert Gas Welded Dissimilar AA5083 and AA6061 Aluminum Alloy Joints
This study explores how the frequency of vibrations affects the physical, mechanical, and
residual stress properties in dissimilar metals welding between AA5083 and AA6061. The …
residual stress properties in dissimilar metals welding between AA5083 and AA6061. The …
Influence of tool pin profile on the mechanical strength and surface roughness of AA6061-T6 overlap joint friction stir welding
This study presents the tensile strength and surface roughness resulting from friction stir
welding (FSW) on the lap joint method using AA 6061–T6. FSW is conducted by comparing …
welding (FSW) on the lap joint method using AA 6061–T6. FSW is conducted by comparing …
FSW on AA5083 H-111 and AA5754 H-111 dissimilar plates with scandium intermetallic layer
This study studied the effects of Al-4.5 Mg-0.3 Sc alloy addition to the weld nugget of friction
stir weldments. The scandium (Sc) is introduced into the weld nugget zone in the form of an …
stir weldments. The scandium (Sc) is introduced into the weld nugget zone in the form of an …
Effect of assisted heating on microstructure, material flow and intermetallic formation during friction stir welding of copper alloy and AA 6063
The friction stir welding (FSW) is a newly developed solid-state welding technique, which
addresses a number of practical issues such as reducing melt related defects by reducing …
addresses a number of practical issues such as reducing melt related defects by reducing …
Microstructural and Mechanical Properties of Dissimilar Aluminium Alloys by Friction Stir Welding
K Sekar, P Vasanthakumar - Key Engineering Materials, 2022 - Trans Tech Publ
In the present study, the dissimilar aluminium alloys AA 2014-T651 and AA 7075-T651 of 16
joints was successfully joined with (four welding speeds (50, 60, 70, 80 mm/min), four …
joints was successfully joined with (four welding speeds (50, 60, 70, 80 mm/min), four …