AR Gupta, A Kumar - IETE Journal of Research, 2022 - Taylor & Francis
In this paper, a comprehensive review of the distribution system (DS) with Distributed Generation (DG) and Distribution Flexible AC Transmission System (D-FACTS) allocation for …
AR Gupta, A Kumar - Procedia Computer Science, 2018 - Elsevier
In this article the impact of various load models on optimal allocation of D-STATCOM is obtained by DNO for radial distribution system with an objective of power loss reduction with …
SR Salkuti - Indonesian Journal of Electrical Engineering …, 2019 - pdfs.semanticscholar.org
The main aim of this paper is to determine optimal locations and sizing of Distributed Generations (DGs) and Distribution STATic COMpensator (D-STATCOM) in the distribution …
AR Gupta - 2017 7th International Symposium on Embedded …, 2017 - ieeexplore.ieee.org
The expansion of power system has led to the increase of Distributed Generation (DG) to fulfil the increase in the load demand. The DG opted has led to the increase in the losses …
A Eid, S Kamel - 2020 IEEE Electric Power and Energy …, 2020 - ieeexplore.ieee.org
Three different reactive power compensators (RPCs) are typically used with distribution systems to enhance their performance. The RPC includes a shunt capacitor (C), Static Var …
In low-voltage grids with a wide spread of domestic and/or small commercial consumers, mostly single-phase, problems can appear due to unbalanced power consumption between …
F Fardinfar, MJK Pour - 2023 10th Iranian Conference on …, 2023 - ieeexplore.ieee.org
this paper proposes a hybrid analytical and metaheuristic optimization technique to find the proper locations and sizes for the distributed generator (DG) and Distribution Static …
AK Tagore, AR Gupta - 2017 8th International Conference on …, 2017 - ieeexplore.ieee.org
In this paper the harmonic analysis is carried out after placement of Distributed Generation (DG) and Distribution Static Compensator (D-STATCOM) optimally in a radial distribution …
The primary objective of power systems is to meet the total power requirement, as well as to retain system reliability and security with the economic operation of the system. In recent …