This paper reports on the chemiluminescence footprint of premixed ammonia-methane-air
flames. The chemiluminescence spectrum of laminar twin-flames stabilized with a …

OH* chemiluminescence is one of the major spontaneous emission in flames, and often
applied in combustion diagnostics to indicate flame structure, strain rate, equivalence ratio …

Three-dimensional (3D) measurements are highly desirable both for fundamental
combustion research and practical monitoring and control of combustion systems. This work …

Quantitative measurement of chemiluminescence is a challenging work that limits the
development of combustion diagnostics based on chemiluminescence. Here, we present a …

Cataluminescence (CTL) is a specific chemiluminescence (CL) occurring on the surface of
solid catalysts during heterogeneous catalytic oxidation reactions, and it is still a young …

In this study, we developed a diagnosis method for combustion instability and validated its
performance using experimental data obtained from a hydrogen/natural gas co-firing gas …

The present work demonstrates the feasibility of heat release rate imaging using the laser-
induced fluorescence (LIF) of atomic hydrogen (H-atom) and formaldehyde (CH 2 O) in …

We report a spatially resolved spectroscopic study of the visible chemiluminescence
emission from different premixed ammonia-air-oxygen flames stabilized on a laminar flat …

In this work, extensive chemical kinetic modeling is performed to analyze the combustion
and emissions characteristics of premixed NH 3/CH 4–O 2/N 2/H 2 O 2 mixtures at different …

Numerical studies on 1-D, non-sooting counterflow diffusion flames were performed to
determine the precision with which the total heat release rate can be calculated using light …