The distribution of hydrogen entering an Fe sheet under a droplet of NaCl solution was
successfully visualized using a hydrogenochromic sensor consisting of a polyaniline layer …

The effect of Al 3+ on the hydrogen permeation behaviour of steel during cyclic corrosion
was investigated under AlCl 3 droplets with varying Al 3+ concentrations. The permeated …

Hydrogen entry into high-strength steel after local sodium chloride predeposition and during
exposure to humid air was studied using scanning Kelvin probe. Two regions with different …

Local hydrogen entry under a NaCl droplet on Fe sheets was analysed by employing a
hydrogenochromic sensor and electrochemical hydrogen permeation tests. Large …

The corrosion morphology of steel under aqueous NaCl, MgCl 2, and ZnCl 2 droplets and
the corresponding hydrogen permeation behaviour were investigated using surface …

Cathodic processes in initial stages of atmospheric corrosion of rolled zinc and bare, Al–Si
and Zn–Fe coated press hardened steel were studied. A ratio between hydrogen evolution …

The properties of the oxide films formed on solution-annealed and cold-worked 316L
stainless steel (SS) specimens with and without charged hydrogen in deaerated pressurized …

Hydrogen absorption into steel during atmospheric corrosion has been of a strong concern
during last decades. It is technically important to investigate if hydrogen absorbed under …

In this study, a Kelvin probe (KP) technique combined with the Devanathan-Stachurski
electrochemical hydrogen permeation method was applied for simultaneous measurements …

To evaluate the susceptibility of steels to hydrogen embrittlement, it must be hydrogen
charged and have its hydrogen content controlled before any mechanical testing. In this …