Pitting is a common type of localized corrosion in passive alloys that can cause rapid failure
of material or equipment. In the case of stainless steels, non-metallic inclusions have been …

Localized corrosion triggered by inclusions is prone to metallic material failure. Except for
chemical dissolution of some special inclusions, the principle of galvanic coupling is the …

In this work the initial stages of the pitting corrosion in Q460NH weathering steel in a marine
environment was studied. To elucidate the effects of inclusions modified by rare earth (RE) …

The influence of Al 2 O 3 inclusions on the localized corrosion behaviour of Q460NH steel
was investigated in a simulated marine environment. According to the current sensing …

Detailed understanding of localised corrosion phenomena induced by inclusions in low-
alloy steel is extremely critical as any corrosion-induced premature failure can potentially …

Electroanalytical chemists and others are concerned not only with the application of new
and classical techniques to analytical problems, but also with the fundamental theoretical …

The effect of tellurium (Te) on the localised corrosion mechanism in 15–5PH stainless steel
is studied in a simulated marine environment. The addition of Te changed the composition …

The microstructures and composition at and around inclusions in casted CoCrFeMnNi alloy
were studied. It was found that the Cr-depletion zone caused by the formation of MnO· Cr 2 …

Stainless steels (SSs) display striking characteristics which can nominate them as
prospective candidates for an endless list of applications. These properties can be further …

This work reports the mechanism of corrosion resistance enhancement of 316 L stainless
steel after Te-RE alloying. The individual MnS inclusions are replaced by composite …