Laser powder bed fusion (LPBF) of AlSi10Mg alloy is widely studied for the aerospace and
automotive applications. Considering safety over cost, fatigue life of the material is very …

Ultrasonic fatigue testing is a resourceful (time-and cost-saving) approach to assess the
dynamic failure of materials in the gigacycle range (ie, when the number of cycles to failure …

Ultrasonic fatigue tests were performed to investigate high and very high cycle fatigue
behaviors of a laser additively manufactured Inconel 718 (IN718) alloy in the as-deposited …

Fatigue performance in both traditional and additively manufactured materials is severely
affected by the presence of defects, which deserve special attention to ensure the in-service …

It is well-known in the literature that the fatigue response of specimens produced through
Additive Manufacturing (AM) processes is mainly controlled by the defect population …

This paper studies the influence of build orientation and mean stress on the very-high-cycle
fatigue (VHCF) behavior of AlSi10Mg fabricated by selective laser melting (SLM) …

In-situ fatigue tests were conducted for exploring the fatigue crack propagation process for Ti-
6Al-4V manufactured by selective laser melting (SLM). Fatigue specimens were prepared …

The high-cycle and very-high-cycle fatigue (VHCF) behavior of AlSi10Mg specimens
manufactured by selective laser melting with different printing powder sizes was …

This paper experimentally investigates the effect of the specimen volume (size-effect) on the
Very-High-Cycle-Fatigue (VHCF) response of SLM AlSi10Mg specimens. Tension …

Axial loading fatigue tests with stress ratio of 0 were conducted in investigating the influence
of building directions (0°, 45° and 90°) on high cycle fatigue property of a selective laser …