The study was carried out to investigate the manufacturing possibility of Silicon Carbide
(SiC) by direct Powder Bed Selective Laser Processing (PBSLP) experimentally and …

The mechanical properties of a highly textured alumina have been studied and show a
significant improvement in bend strength and Weibull modulus when compared to a …

Использование бадделеита особенно важно в рамках программы импортозамещения и
повышения конкурентоспособности отечественной продукции. В книге обобщены …

ZrO2–WC ceramic composites with 40vol% WC were consolidated by pulsed electric current
sintering (PECS) for 4min at 1450° C under a pressure of 60MPa. The effect of ZrO2 …

Multiwall Carbon Nanotubes (MWCNT)-alumina nanocomposites have been fabricated by
colloidal processing and uniaxial hot pressing. In the nanotube sols, the electrical …

Zirconia matrix composites with tungsten carbide inclusions were obtained by hot pressing
at 1400° C for 40 min. The carbide particle content was changed from 10 to 50 vol.%. All the …

Non-cubic crystals exhibit anisotropic physical and functional properties. Microscopic
crystallites as constituents of polycrystalline materials are randomly oriented, thus …

This work adds new experimental facts on room temperature hardness and flexural strength
of alumina and composites with 1, 2, 5 and 10 vol% single-walled carbon nanotubes …

A TiO2–Y2O3–ZrO2 solid solution was prepared by the coprecipitation–calcination
technique. The resulting powder of+ 100 m2/g specific surface area was mixed with a …

A study has been carried out on the processing of silicon carbide platelet-reinforced yttria-
stabilised zirconia ceramics, using slip casting techniques followed by cold isostatic …