In order to establish a relationship between microstructure and mechanical properties, we
systematically annealed a Zr-based bulk metallic glass (BMG) at 100~ 300° C and …

In this study, nanocrystalline Ti and TiO 2 powders were synthesized by wet milling of Ti
powder within water and reactive milling of Ti powder under oxygen atmosphere …

The kinetic spotlight of crystallization has been studied to a large extent by preceding crucial
studies, as well as by numerous papers published on the specific subject of metallic glasses …

Thermal analyses on squeeze cast aluminum alloy A380 (SC A380) solidified under 90 MPa
were carried out to study the microstructure development of the alloy, in which a differential …

The influence of the transition alloying element nickel and the alkaline earth element
strontium on the microstructure and tensile properties of squeeze cast Al− Si‐Cu alloy under …

The microstructure of amorphous and nanocrystalline Mg 65 Cu 20 Y 10 Zn 5 alloy in as-
quenched and post-annealed state was examined using neutron diffraction (ND), Reverse …

We report on a work of the influence of the mechanical alloying on the microstructure,
thermal and mechanical features of Mg 65 Ni 20 Y 15− x Si x (X= 1, 2, 3) alloys. The Mg …

The alloys with different compositions in the Al‐rich corner of the Al‐Co‐Y ternary system
were prepared by conventional casting and further processed by melt‐spinning technique …

In this study, the Mg/B4C composite reinforced with boron carbide particles was produced by
mechanical milling method using waste AZ91 magnesium alloy chips. The mechanical and …

Recrystallization kinetics of 75% cold rolled Al-6Mg alloy with ternary scandium is analyzed
from the micro-hardness variation. Isothermally annealed aluminum alloy samples were also …