Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy
The hot tensile deformation behaviors of an Al–Zn–Mg–Cu alloy are studied by uniaxial
tensile tests under the deformation temperature of 340–460° C and strain rate of 0.01–0.001 …
tensile tests under the deformation temperature of 340–460° C and strain rate of 0.01–0.001 …
Effects of initial aging time on processing map and microstructures of a nickel-based superalloy
Hot compressive deformation behaviors of the aged nickel-based superalloy are studied
under the deformation temperature range of 920–1040° C and strain rate range of 0.001–1 …
under the deformation temperature range of 920–1040° C and strain rate range of 0.001–1 …
Study of static recrystallization behavior in hot deformed Ni-based superalloy using cellular automaton model
A cellular automaton model (CA) with probabilistic state switches is developed to simulate
the microstructural evolution in a Ni-based superalloy during static recrystallization (SRX) …
the microstructural evolution in a Ni-based superalloy during static recrystallization (SRX) …
In-situ observations and modeling of static recrystallization in 300 M steel
The study of static recrystallization (SRX) has been widely concerned for its importance in
regulating the microstructure and mechanical properties of deformed materials. In the paper …
regulating the microstructure and mechanical properties of deformed materials. In the paper …
[HTML][HTML] Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel
To examine the austenite grain growth behavior and kinetics under isothermal
austenitization process in a low alloy medium carbon forged steel, heat treatments at …
austenitization process in a low alloy medium carbon forged steel, heat treatments at …
[HTML][HTML] Microstructure evolution and static recrystallization kinetics in hot-deformed austenite of coarse-grained Mo-free and Mo containing low-carbon CrNiMnB …
The static recrystallization characteristics and microstructure evolution in hot-deformed
austenite were evaluated for a newly developed low-carbon CrNiMnB ultrahigh-strength …
austenite were evaluated for a newly developed low-carbon CrNiMnB ultrahigh-strength …
A new method to establish dynamic recrystallization kinetics model of a typical solution-treated Ni-based superalloy
The dynamic recrystallization (DRX) behavior of a typical solution-treated Ni-based
superalloy is investigated by hot compressive tests and metallographic observations. The …
superalloy is investigated by hot compressive tests and metallographic observations. The …
Austenite grain growth and grain size distribution in isothermal heat-treatment of 300M steel
RC Chen, C Hong, JJ Li, ZZ Zheng, PC Li - Procedia engineering, 2017 - Elsevier
In order to investigate the austenite grain growth behavior in isothermal heat-treatment of
300M steel, experiments under different temperatures are conducted. The influences of time …
300M steel, experiments under different temperatures are conducted. The influences of time …
The kinetics of metadynamic recrystallization in a Ni-Cr-Mo-based superalloy Hastelloy C-276
C Zhang, L Zhang, W Shen, C Liu, Y Xia - Journal of Materials …, 2016 - Springer
The metadynamic recrystallization (MDRX) behavior of a typical Ni-Cr-Mo-based superalloy
Hastelloy C-276 was investigated using two-stage isothermal compression tests on a …
Hastelloy C-276 was investigated using two-stage isothermal compression tests on a …
[HTML][HTML] Practical approach for determining material parameters when predicting grain size after static recrystallization
The static recrystallization (SRX) behavior of 42CrMo steel was investigated by a non-
isothermal hot compression test. The conventional empirical equation for SRX was applied …
isothermal hot compression test. The conventional empirical equation for SRX was applied …