The microstructural evolution during aging and its influence on corrosion behavior and
mechanism of the Fe-19Mn-9Al-0.8 C-5Ni low-density steel (LDS) were studied. The results …

Abstract Effect of phase structure and composition on the passive film properties and pitting
behavior of L2 1-strengthened (CoCrFeNi) 86 Al 7 Ti 7 high-entropy alloy (HEA) in 3.5 wt …

Guide shoe made of steel is an important component of coalcutter and rail transport to
sustain forward direction. However, the guide shoe suffers from wear failure due to the …

Abstract Fe–20Mn–11.5 Al–1.4 C–5Cr (wt%) lightweight stainless steel (LWSS) was found to
have equivalent or better resistance to pitting corrosion than Fe–11Cr (wt%) stainless steel …

In this paper, the passivation behavior and corrosion resistance of a novel Cr-alloyed steel
rebar in carbonized concrete environments were systematically studied, and its passivation …

Pressure is a critical component of preparation processes regardless of its magnitude,
whether it is a few megapascals, such as in metal squeeze casting, or thousands of …

The study investigated the tribology, corrosion, and tribocorrosion performance of aged Fe–
30Mn–8Al–1.2 C–0.1 Ti–(2Cr/Mo) steel, with a focus on oxide film and carbide. The …

Fe-based metallic glass/Al 2 O 3-13 wt% TiO 2 (AT13) composite coatings with sandwich-
like (Fe–S20) and dispersed (Fe-D20) structures were prepared via atmosphere plasma …

Abstract In this work, Fe–20Mn–9Al–3Cr-xC (wt.%, x= 0.8–1.4) steels were designed to
investigate the microstructure, mechanical properties and strain hardening behavior of Cr …

Nickel-base alloy is a type of metal material with excellent properties and is widely used in
many fields. However, in the harsh environment of the acid solution, corrosion causes the …