High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in β phase region
S Shi, J Ge, YC Lin, X Zhang, K Zhou - Materials Science and Engineering …, 2022 - Elsevier
Isothermal compression tests, electron backscatter diffraction (EBSD) observations and
quantitative analysis were performed to investigate high-temperature deformation behavior …
quantitative analysis were performed to investigate high-temperature deformation behavior …
Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression
Hot compression experiments of a Ti55511 titanium alloy are conducted to study the phase
transformation characteristics and dynamic recrystallization (DRX) behavior. It is found that …
transformation characteristics and dynamic recrystallization (DRX) behavior. It is found that …
Constitutive models for high-temperature flow behaviors of a Ni-based superalloy
The high-temperature deformation behaviors of a typical Ni-based superalloy are
investigated by hot compression tests under the strain rate of 0.001–1 s− 1 and temperature …
investigated by hot compression tests under the strain rate of 0.001–1 s− 1 and temperature …
Progress in characterization methods for thermoplastic deforming constitutive models of Al–Li alloys: a review
P Zhang, M Chen - Journal of Materials Science, 2020 - Springer
Aluminum–lithium alloys have been extensively used in the aviation and aerospace field.
Now it is one of the critical materials for the production of large aircraft in China …
Now it is one of the critical materials for the production of large aircraft in China …
A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in α+ β region
Hot compression features of Ti-55511 alloy are investigated by high-temperature
compression tests in α+ β region. It is found that the flow stress and softening mechanisms …
compression tests in α+ β region. It is found that the flow stress and softening mechanisms …
Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy
The hot tensile deformation behaviors of an Al–Zn–Mg–Cu alloy are studied by uniaxial
tensile tests under the deformation temperature of 340–460° C and strain rate of 0.01–0.001 …
tensile tests under the deformation temperature of 340–460° C and strain rate of 0.01–0.001 …
Experimental and theoretical investigation of forming limit diagram for Ti-6Al-4 V alloy at warm condition
Forming limit diagram (FLD) is an important performance index to describe the maximum
limit of principal strains that can be sustained by sheet metals till to the onset of localized …
limit of principal strains that can be sustained by sheet metals till to the onset of localized …
Spheroidization and dynamic recrystallization mechanisms of Ti-55511 alloy with bimodal microstructures during hot compression in α+ β region
Spheroidization and dynamic recrystallization (DRX) mechanisms of a Ti-55511 alloy during
hot compression in α+ β region is investigated. It is found that the spheroidization of lamellar …
hot compression in α+ β region is investigated. It is found that the spheroidization of lamellar …
[HTML][HTML] Evaluation of constitutive equations for modeling and characterization of microstructure during hot deformation of sintered Al–Zn–Mg alloy
Commercial simulation software like QFORM and DEFORM do not possess adequate
material data for alloys produced through powder metallurgy. Therefore, in the present …
material data for alloys produced through powder metallurgy. Therefore, in the present …
Damage and fracture: review of experimental studies
PS Volegov, DS Gribov, PV Trusov - Physical mesomechanics, 2016 - Springer
This paper is a part of a review of recent (last 15 years) publications on experimental and
theoretical methods and approaches for studying damage accumulation and fracture in …
theoretical methods and approaches for studying damage accumulation and fracture in …