In this study, a substitute boriding powder including boric acid as boron source was
prepared and employed for boronizing of SAE 1020 steel. The boronizing processes were …

The results for laser shock peening of duplex stainless steel (22% Chromium–5% Nickel)
using a pulsed Nd: YAG laser (wavelength= 532nm, pulse width= 8ns) for the application to …

In this study, SAE 1020 steel samples were boronized at 850° C for 4 h with different
boronizing mixtures by powder-pack boronizing method. H 3 BO 3 or Na 2 B 8 O 13 was …

In this study, the wear behavior of AISI 1018 borided steel is characterized. The boriding
thermochemical treatment was carried out at 1273 K for 6 h, and different thicknesses of the …

This first regional issue published in STMP highlights the potential and importance of the
research carried out in Latin America regarding surface engineering and tribology. In order …

The purpose of this investigation was to determine whether steels of equal hardness but
different compositions and microstructures would exhibit the same lubricated sliding wear …

Dry sliding tests for steels were performed in air under the test temperature at 400° C and
the loads of 50–250 N. The wear behavior and characteristics were focused on to explore …

Fiber bundles from agricultural residues are promising sources of reinforcement for
composite materials due to their technical and economic advantages. This work aims to …

Debris generated during sliding wear of steels have an important role on tribosystem's
behavior. However, the evolution of morphology, microstructure and hardness of debris and …

This work evaluates the tribological behavior of three samples taken from a pearlitic steel rail
with different hardness values (550, 450 and 370 HV 0.1) due to the in-service work …