Owing to its excellent properties, polycarbonate (PC) is a suitable alternative for
conventional engineering materials; however, its applications are limited by its poor …

In this work, polycarbonate–TiO 2 nanocomposite films were prepared with two different
percentages. The structure of samples were studied by X-ray diffraction. Thermal stability of …

In this paper, an environmentally friendly etching system containing MnO2–H3PO4–H2SO4
colloid was used to investigate surface etching for ABS-polycarbonate (PC/ABS) as a …

Polyethyleneterephthalate (PET) has been modified by 100keV Ni+ and N+ ions using metal
ion from volatile compound (MIVOC) ion source to fluence ranging from 1× 1014 to 1× …

Radiation used in biomedical applications causes chemical changes to biomedical
materials. This work is an ex situ simulation of the influence of low-energy electron (LEE) …

The surface state is a major parameter for the biocompatibility of medical devices. During
storage, the blooming of additives may occur on the surface of polymers and modify their …

Rapid microfabrication of mesoporous silica film at low temperature was achieved with low-
energy electron beam (LEEB) irradiation. A mesostructured film (thickness∼ 200 nm), which …

Purpose: The purpose of this study is to investigate the possibilities of producing contact
lenses with better properties than those made produced by using conventional methods, by …

A cyclo-olefin copolymer was subjected to an e-beam ionizing treatment. Two doses were
studied: one corresponding to the recommended dose for the sterilization of pharmaceutical …

In this work, polycarbonate-TiO2 nanocomposite films were prepared with different
percentages. The aim was to consider the effect of O2 LF plasma (50 Hz) on the …