Increasing charging rate is an upgrading direction of electrochemical energy storage, which
might induce more heat accumulation, posing a higher risk to cause the battery thermal …

Experiments were conducted in a closed duct filled with copper foam to study the premixed
syngas-air flame propagation behaviors. A copper foam with a thickness of 20 mm is …

To further grasp the failure process and explosion hazard of battery thermal runaway gas,
numerical modeling and investigation were carried out based on a severe battery fire and …

Based on the correlation analysis of venting flame propagation and pressure rise both sides
of vessel, the dynamics venting characteristics of gas/dust explosions and influence of dust …

Safety characteristics are widely used in the process industry to design facilities in a safe
way. For powders, they are normally investigated under turbulent conditions inside a …

Combustible gases, dusts and their mixtures are widely present in human production and
life, and the fire and explosion disasters caused by them pose a serious threat to the field of …

This article presents research results on mechanically generated oil mists. The research was
carried out for oil mixtures for the Agip/Eni Cladium 120 SAE 40 API CF oil for industrial and …

According to the high explosion risk of coal dust explosion and the release of harmful gases,
an ammonium polyphosphate-modified aerogel material (ASA) was prepared to study its …

A numerical model for the calculation of the minimum ignition energy (MIE) of dust clouds is
developed based on heat transfer and particle reaction kinetics. The model is an update of …

Unlike the explosion limit of liquid fuel vapour, the explosion limit of aerosol is a function of
the aerosol state. In this study, a prediction model of the lower explosion limit (LEL) of liquid …