Skillfully enhanced the oxidation resistance of the traditional TA15 titanium alloy through TiB ceramic phase with network distribution
X Xu, Q Kang, G Wang, Y Liu, Z Li, S Luo - Ceramics International, 2023 - Elsevier
In this paper, the oxidation behavior of the TiBw/TA15 composite has been studied at 950° C
under laboratory air for 2 h, 4 h, 6 h and 8 h. Overall, the alloy shows a slight mass gain in all …
under laboratory air for 2 h, 4 h, 6 h and 8 h. Overall, the alloy shows a slight mass gain in all …
High Temperature Oxidation Resistance of TB8 Titanium Alloy after Equal Channel Angular Pressing and Heat Treatment
X Bai, X Xu, Y Liu, B Cao, C Hu, F Chen - Journal of Materials Engineering …, 2022 - Springer
In this paper, the metastable β titanium alloy TB8 (Ti-12.76 Mo-2.13 Nb-2.73 Al-0.16 Si) was
used as the starting material, and the secondary processing method combining equal …
used as the starting material, and the secondary processing method combining equal …
Oxidation performance of particle-reinforced Ti750 matrix composites
VM Tabie, X Xu, MK Osman, J Li - Proceedings of the …, 2023 - journals.sagepub.com
This study used SiCp, SiCw, B4C, and GPLs as reinforcements for Ti750 matrix alloy and
composites synthesized by spark plasma sintering. The oxidation performances of the …
composites synthesized by spark plasma sintering. The oxidation performances of the …
Effects of heat treatment and carbon nanotubes content on microstructure and mechanical properties of CNTs/Ti–Mo–Nb–Al–Si composites
J Li, R Peng, K Zhou, J Huang, J Ru, Y Zhou, X Xu - Applied Physics A, 2021 - Springer
In this paper, carbon nanotubes (CNTs) reinforced Ti–12.8 Mo–2.1 Nb–2.7 Al–0.2 Si (TB8)
matrix composites were synthesized by low-energy ball milling and cold pressing sintering …
matrix composites were synthesized by low-energy ball milling and cold pressing sintering …
Control of the Lamellar Structure and Analysis of Tensile Properties of TiC/Ti-6Al-3Sn-9Zr-1.5 Mo Composite Produced by In Situ Casting Technique
D Zhu, D Dong, L Liu, X Wang, J Qi - Metals, 2021 - mdpi.com
In the present paper, new heat treatment was performed on 10 vol.% TiC/Ti-6Al-3Sn-9Zr-1.5
Mo composite fabricated by an in situ casting technique. The aim is to obtain fully lamellar …
Mo composite fabricated by an in situ casting technique. The aim is to obtain fully lamellar …