Magnetic small-angle neutron scattering
Small-angle neutron scattering (SANS) is one of the most important techniques for
microstructure determination, being utilized in a wide range of scientific disciplines, such as …
microstructure determination, being utilized in a wide range of scientific disciplines, such as …
Precipitation-site competition in duplex stainless steels: Cu clusters vs spinodal decomposition interfaces as nucleation sites during thermal aging
Competing microstructural evolution mechanisms can exist simultaneously when duplex
stainless steels are operating for several decades in a high temperature service …
stainless steels are operating for several decades in a high temperature service …
Effect of heat treatment above the miscibility gap on nanostructure formation due to spinodal decomposition in Fe-52.85 at.% Cr
The effect of heat treatment at temperatures above the miscibility gap (MG) on subsequent
nanostructure formation due to spinodal decomposition (SD) has been investigated in an Fe …
nanostructure formation due to spinodal decomposition (SD) has been investigated in an Fe …
Quantitative nanostructure and hardness evolution in Duplex stainless steels: Under real low-temperature service conditions
Duplex stainless steels are a group of widely used stainless steels, because of their
attractive combination of strength and corrosion resistance. However, these steels embrittle …
attractive combination of strength and corrosion resistance. However, these steels embrittle …
Nanostructure, microstructure and mechanical properties of duplex stainless steels 25Cr-7 Ni and 22Cr-5Ni (wt.%) aged at 325 C
The nanoscale concentration fluctuation evolution due to phase separation (PS) and the
corresponding mechanical property changes in two duplex stainless steels, 22Cr-5Ni (2205) …
corresponding mechanical property changes in two duplex stainless steels, 22Cr-5Ni (2205) …
Comparison between SANS and APT measurements in a thermally aged Fe-19 at.% Cr alloy
Abstract α′ precipitation in a Fe-19 at.% Cr alloy aged at 500° C up to 2008 h has been
characterized by both APT and SANS. This paper shows that when using an appropriate …
characterized by both APT and SANS. This paper shows that when using an appropriate …
Thermally decomposed binary Fe–Cr alloys: toward a quantitative relationship between strength and structure
S Küchler, V Vojtech, SSA Gerstl… - Advanced …, 2022 - Wiley Online Library
Binary Fe–Cr alloys are model alloys for ferritic steels proposed as structural materials for
future fusion reactors. They are used to investigate the fundamental mechanisms of their …
future fusion reactors. They are used to investigate the fundamental mechanisms of their …
Effect of cooling rate after solution treatment on subsequent phase separation during aging of Fe-Cr alloys: A small-angle neutron scattering study
The effect of cooling rate after solution treatment on the initial structure of concentrated
binary Fe-Cr alloys and the effect of the initial structure on phase separation during …
binary Fe-Cr alloys and the effect of the initial structure on phase separation during …
Evolution of nanoscale Cr-rich phase in a Fe-35 at.% Cr alloy during isothermal aging
Z Yan, Y Li, X Zhou, Y Zhang, R Hu - Journal of Alloys and Compounds, 2017 - Elsevier
A quantitative investigation of phase decomposition in Fe-35 at.% Cr alloy aged at 773 K
was performed by using atom probe tomography (APT) and phase-field simulation. The …
was performed by using atom probe tomography (APT) and phase-field simulation. The …
The effect of short-range order on passivation of Fe-Cr alloys
While it is well known that 12–13 at.% chromium is required for stainless-like passivation
behavior of binary Fe-Cr alloys, there remain outstanding questions regarding the …
behavior of binary Fe-Cr alloys, there remain outstanding questions regarding the …