Overview of predictive control technology for permanent magnet synchronous motor systems

J Peng, M Yao - Applied Sciences, 2023 - mdpi.com
Permanent magnet synchronous motors (PMSMs) are commonly used in the automation
industry. With the speedy development of digital system processors, predictive control as a …

An improved deadbeat predictive stator flux control with reduced-order disturbance observer for in-wheel PMSMs

X Sun, Y Zhang, G Lei, Y Guo… - IEEE/ASME Transactions …, 2021 - ieeexplore.ieee.org
In this article, an improved deadbeat predictive stator flux control (DPSFC) based on
disturbance observer is proposed to address the problems of the steady-state tracking error …

Finite control set model-free predictive current control of PMSM with two voltage vectors based on ultralocal model

Z Sun, Y Deng, J Wang, T Yang… - IEEE Transactions on …, 2022 - ieeexplore.ieee.org
Model-free predictive current control (MFPCC) that only needs the input and output data of
the system can eliminate the influence of the motor parameters mismatch. In the …

Compensated deadbeat predictive current control considering disturbance and VSI nonlinearity for in-wheel PMSMs

X Sun, Y Zhang, Y Cai, X Tian - IEEE/ASME transactions on …, 2022 - ieeexplore.ieee.org
In this article, a compensated deadbeat predictive current control (CDPCC) based on
composite sliding mode disturbance observer (CSMDO) is proposed in response to the …

Integral sliding mode control based deadbeat predictive current control for PMSM drives with disturbance rejection

Y Xu, S Li, J Zou - IEEE Transactions on Power Electronics, 2021 - ieeexplore.ieee.org
To promote the control performance of the modern high-precision permanent-magnet
synchronous motor (PMSM) system on the existence of the time-delay and parameter …

Robust deadbeat predictive direct speed control for PMSM with dual second-order sliding-mode disturbance observers and sensitivity analysis

S Li, Y Xu, W Zhang, J Zou - IEEE Transactions on Power …, 2023 - ieeexplore.ieee.org
A novel robust deadbeat predictive direct speed control (RDP-DSC) method for permanent
magnet synchronous motor is proposed to improve the speed control bandwidth and …

Hybrid current controller for permanent-magnet synchronous motors using robust switching techniques

HAG Al-Kaf, SS Hakami, KB Lee - IEEE Transactions on Power …, 2022 - ieeexplore.ieee.org
This study proposes a hybrid current controller for a permanent-magnet synchronous motor
fed by a two-level inverter. It combines the advantages of model predictive control (MPC) …

Improved deadbeat predictive current control of dual three-phase variable-flux PMSM drives with composite disturbance observer

K Yu, Z Wang - IEEE Transactions on Power Electronics, 2022 - ieeexplore.ieee.org
The dual three-phase variable-flux permanent-magnet synchronous motors (VF-PMSM)
have received more attention in the variable-speed drive applications since they have …

Robust predictive cascaded speed and current control for PMSM drives considering parameter variations

X Sun, Z Su, G Lei, M Yao - IEEE Transactions on Industrial …, 2023 - ieeexplore.ieee.org
This article proposes a predictive cascaded speed and current control to improve the
dynamic performance and robustness of permanent magnet synchronous motor drives …

Deadbeat predictive current control for high-speed permanent magnet synchronous machine drives with low switching-to-fundamental frequency ratios

S Dai, J Wang, Z Sun, E Chong - IEEE Transactions on …, 2021 - ieeexplore.ieee.org
This article analyzes the conventional dq-frame model-based deadbeat predictive current
control (DBPCC) methods for high-speed permanent magnet synchronous machine (PMSM) …