Deformation-induced martensitic transformations: A strategy for overcoming the strength-ductility trade-off in high-entropy alloys
MS Mehranpour, N Rasooli, HS Kim… - Current Opinion in Solid …, 2024 - Elsevier
High-entropy alloys (HEAs) have become an important topic in modern materials science
due to their exceptional properties. Despite their attractive properties, achieving a superior …
due to their exceptional properties. Despite their attractive properties, achieving a superior …
Investigation of grain boundary segregation evolution and corrosion behavior in 7050 aluminum alloy under oscillating laser melting
H Song, C Zhao, H Bai, X Ren, H Shao, J Chi… - Journal of Alloys and …, 2025 - Elsevier
The weld structures of 7xxx series aluminum alloy have been applied on aerospace, rail
transport, petrochemical engineering, and other fields. However, the corrosion resistance of …
transport, petrochemical engineering, and other fields. However, the corrosion resistance of …
Influence of grain sizes and secondary phases on the mechanical behavior and corrosion resistance in a non-equiatomic NiCrCoFeMoAlTi high-entropy alloy
Single-phase face-center cubic (FCC) structured Ni 27.7 Cr 24 Co 23.5 Fe 15.7 Mo 1.6 Al 3
Ti 4.5 high-entropy alloy (HEA) samples with different grain sizes were first achieved …
Ti 4.5 high-entropy alloy (HEA) samples with different grain sizes were first achieved …
Achieving superior strength-ductility synergy and enhanced corrosion resistance in a novel medium-entropy alloy via grain refinement strategy
The effect of grain size on mechanical properties and corrosion resistance of Ni 62 Cr 10 V
28 MEA was investigated. The findings indicated that grain refinement significantly …
28 MEA was investigated. The findings indicated that grain refinement significantly …
Coupling different strengthening mechanisms with transformation-induced plasticity (TRIP) effect in advanced high-entropy alloys: a comprehensive review
Metastable high-entropy alloys (HEAs) with desirable stacking fault energy (SFE) have
attracted considerable attention due to their superior strength-ductility synergy, which results …
attracted considerable attention due to their superior strength-ductility synergy, which results …
Improving the corrosion and mechanical properties of Mg-8Gd-3Y-0.4 Zr alloy synergistically via regulating micro-galvanic corrosion and dislocation density
B Feng, K Zhu, X Shang, Y Chen, H Wang, C Yang… - Corrosion …, 2024 - Elsevier
This study aims to process Mg alloys using rotary swaging technique to enhance their
corrosion resistance and mechanical properties. By optimizing the rotary swaging …
corrosion resistance and mechanical properties. By optimizing the rotary swaging …
Effect of annealing parameters on the microstructure and tribological properties of FeCoCrNiMn laser cladding layers
D Zhang, K Song, Y Gao, Z Zhai, Y Zhang - Materials Today …, 2025 - Elsevier
The FeCoCrNiMn laser cladding layer exhibits low hardness and poor wear resistance,
limiting its applications in the tribology field. The effect of annealing temperature (500° C …
limiting its applications in the tribology field. The effect of annealing temperature (500° C …
Ultrasonic shot peening improved corrosion resistance of the Al0. 3Cu0. 6CoCrFeNi high-entropy alloy by refining segregation and grain
X Chen, Y Lou, D Guo, W Chang, H Qian, D Chen… - Corrosion …, 2025 - Elsevier
In this work, the corrosion resistance of the Al 0.3 Cu 0.6 CoCrFeNi high-entropy alloy (HEA)
treated by ultrasonic shot peening (USSP) was investigated. The results showed that the …
treated by ultrasonic shot peening (USSP) was investigated. The results showed that the …
A non-precious refractory carbide coating capable of competing with Pt in proton exchange membrane water electrolysis
X Wang, W Hao, H Luo, J Zhang, H Cheng… - Chemical Engineering …, 2025 - Elsevier
Aiming to enhance the cost-effectiveness of proton exchange membrane water electrolyzer
(PEMWE) technology by substituting expensive Pt coatings on titanium separator plates, we …
(PEMWE) technology by substituting expensive Pt coatings on titanium separator plates, we …
Effect of annealing on microstructure and corrosion resistance of W+ in-situ TiC enhanced CoCrFeNiSi0. 2 high entropy alloy coatings by laser cladding
S Li, W Niu, Y Zheng, YW Lei - Materials Today Communications, 2024 - Elsevier
The W+ in-situ TiC reinforced CoCrFeNiSi 0.2 high-entropy alloy coating (The alloy coating)
was prepared using laser cladding, and the effect of different annealing temperatures on the …
was prepared using laser cladding, and the effect of different annealing temperatures on the …