This review focuses on the comparison of the spark plasma sintering (SPS) with other
fabrication methods of MAX-phase materials. In the view of optimizing properties for …

MAX phases are a large family of materials with more than 150 different compositions that
have been extensively investigated during the last 25 years. They present a layered …

To realize sustainable development, more and more countries forwarded carbon neutrality
goal. Accordingly, improving the utilization efficiency of traditional fossil fuel is an effective …

MAX phases and their MXene compounds have received significant attention owing to their
extensive potential applications. The quality and purity of the MAX phase guarantee the …

In this experiment, a passively mode-locked erbium-doped fiber laser was successfully
realized by utilizing chromium aluminum carbide (Cr2AlC) MAX phase as a saturable …

Cr2AlC layers with thickness up to 100 µm were deposited by high‐velocity‐atmospheric
plasma spray (HV‐APS) on Inconel 738 substrates to analyze the potential of MAX phases …

Since the synthesis of non-oxidized ceramic and alloy powders requires both high
temperature and oxygen insulation conditions, here we demonstrate a cost-efficient molten …

Abstract Highly pure Cr 2 AlC powders were synthesized and deposited for the first time by
cold spray technology on stainless steel substrates. The Cr 2 AlC coatings were relative …

Abstract Dense Cr2AlC materials were tested under a gradient loading for the first time using
a burner rig. The severe thermal cycling conditions consist of 500 short cycles at 1200° C …

Cr2AlC foams have been processed for the first time containing low (35 vol%), intermediate
(53 vol%), and high (75 vol%) content of porosity and three ranges of pore size, 90‐180 μm …