Extrusion process is one of the main means of forming lightweight and low plastic
magnesium alloy components. In order to solve the long-term bottlenecks which restrict the …

The microstructure-dependent corrosion resistance of dual structured fine-grained Mg-7.5 Li-
3Al-1Zn has been investigated. The alloys were extruded using extrusion with a forward …

This study presents a comprehensive evaluation of Equal Channel Angular Pressing
(ECAP) processing on the structural evolution and mechanical properties of AA2xxx …

The effects of extrusion speed on the microstructure and tensile properties of a recently
developed Mg–9Al–0.8 Zn–0.9 Ca–0.6 Y–0.5 MM (AZXWMM91100) alloy are investigated …

The combined addition of small amounts of Ca and Y to Mg–Al–Zn alloys has recently been
found to greatly improve the ignition resistance, corrosion resistance, and mechanical …

Multi-pass caliber-rolled Mg alloys possess a unique basal texture with split basal poles that
are in contrast to alloys subjected to other plastic deformation processes. The intrinsic nature …

In this study, the microstructure-dependent corrosion of fine-grained Mg-4Li-3Al-Zn alloys in
the chloride containing solutions is described. The materials were processed using …

Abstract The quaternary Mg–9Li–2Al–0.5 Sc alloy (in wt%) was prepared from pure
components. After homogenization, the alloy was subjected to severe plastic deformation by …

A novel and effective method to fabricate the bimetallic composite tube was proposed using
a KOBO extrusion technique with an oscillating die. Compared with the traditional extrusion …

Due to limited slip systems activated at room temperature, the plastic deformation of Mg and
its alloys without any preheating of initial billets is significantly limited. To overcome those …