Titanium alloys are widely used in various areas, particularly in medical and dental
industries, due to their remarkable properties. Still, the optimum cutting conditions for …

Limited slip systems of α structure always play a major role in hindering strength-ductility
synergy improvement of titanium (Ti) alloys. To overcome the strength-ductility trade-off of Ti …

Abstract Titanium–aluminum (Ti–Al) multi-material structures have tremendous potential for
use in lightweight applications. Laser powder-bed fusion (LPBF) enables the preparation of …

Both nanotwins and 9R phase are rarely form in titanium alloys due to their high stacking
fault energy. In this work, we report for first time the formation of nanotwins and 9R phase in …

Abstract Additive-manufactured Ti-6Al-4V has a variety of applications in the marine, energy
and chemical industries. A high strength Ti-6Al-4V-8.5 Cu component was fabricated by in …

Preventing anisotropy in materials produced by laser powder bed fusion (LPBF) has
become a major challenge. In this work, we achieved good mechanical properties in LPBF …

Microstructure transformation and mechanical properties of Ti–6Al–4V based on laser wire
deposition were studied with the addition of different contents Cu. With the addition of 5.4 …

Preparing a flame-resistant coating with high adhesion to the titanium substrate is a feasible
method to prevent “titanium fire”. In this work, Ti-25V-15Cr-0.2 Si, which is a beta stabilized …

Ti-Cu alloys have broad application prospects in the biomedical field due to their excellent
properties. The properties of Ti-Cu alloys are strongly dependent on Cu content …

Abstract The β-type Ti35NbxCu alloys (x= 0, 1, 3, 5, and 7 wt%) were produced by laser
powder bed fusion (LPBF) and the influence of Cu content on the microstructure and …