The application of additively manufactured (AM) stainless steel (SS) parts is rapidly
emerging in a broad spectrum of industries. Laser powder bed fusion (LPBF) and direct …

Ultrasonic nanocrystal surface modification (UNSM) is a unique, mechanical, impact-based
surface severe plastic deformation (S2PD) method. This newly developed technique finds …

The initiation and propagation of flow accelerated corrosion (FAC) and erosion corrosion
(EC) have been explored using an electrochemically integrated multi-electrode array and …

Passive film was potentiostatically grown on Type 304 stainless steel at potentials between−
0.4 and 0.3 V vs. Hg/HgSO4 in 50mV intervals. Electrochemical impedance spectroscopy …

The erosion-corrosion behaviour of a near fully dense 316L stainless steel (316L SS), with
relative density higher than 99.5%, produced by selective laser melting (SLM) has been …

Duplex stainless steel (DSS) 2205 produced by laser powder bed fusion (LPBF) additive
manufacturing was found to possess poor repassivation ability and weak resistance to …

The pure corrosion, pure erosion and erosion-corrosion behaviours of X65 carbon steel in
corrosive fluid and slurry of different pH were studied at low flow velocity. Results show that …

In this study, types 440B (martensitic) and 304 (austenitic) stainless steel were subjected to
microstructural characterisation and a series of tribocorrosion tests in a pin-on-disc facility …

The passive behaviour and erosion–corrosion behaviour of a HVOF sprayed Fe-based
amorphous metallic coating have been investigated in 3.5 wt.% NaCl solution by using …

This paper firstly provides an overview of major efforts made over the past several decades
on developing the test apparatus for the study of erosion-corrosion of ferrous-based steels …