This review summarizes the main advances published over the last 15 years outlining the
different methods of grafting, including reactive extruder systems, surface modification …

Neat and compatibilized high density polyethylene and ethylene vinyl acetate blend
membranes were fabricated via thermally induced phase separation method. ATR-FTIR …

In this study, the morphology, rheological behavior, thermal behavior, and mechanical
properties of a polyamide 6 (PA6) and olefin block copolymer (OBC) blend compatibilized …

This chapter discusses the principal aspects and advances of crystallization within confined
geometries. Confined crystallization is a phenomenon that occurs in droplet dispersions …

The impact of small amounts of organomodified clay (OMMT) on the photo-degradation
behaviour of two blends obtained by mixing either low-density polyethylene (LDPE) or high …

Semiaromatic polyamides are used for metal replacement in advanced engineering
applications to reduce weight and improve efficiency, but their range of application is limited …

The effect of compatibilizer (LLDPE-g-MA) on mechanical, thermal, morphological and water
absorption properties of Nylon-6/LLDPE blends was investigated. SEM analysis and image …

This work reports the study of the compatibilization of the blend of biopolyethylene and
biopolyamide 6.10, both biobased. In this work, two polymers functionalized with maleic …

In this work, compatibilizer (maleic anhydride grafted high density polyethylene, HDPE-g-
MA) and clay were introduced into immiscible HDPE/polyamide 6 (PA6) blend. Three …

Polymers generally form incompatible mixtures that make the process of recycling difficult,
especially the mechanical recycling of mixed plastic waste. One of the most commonly used …