Tin monosulfide (SnS) thin films were deposited on glass substrates at room temperature
utilising a simple, inexpensive, and modified chemical approach known as Successive …

Perovskite solar cells (PSCs) have demonstrated excellent photovoltaic performance which
currently rival the long-standing silicon solar cells' efficiency. However, the relatively poor …

The present study aims to investigate the optimum deposition conditions for preparation of
CZTS thin films using the spray pyrolysis method. CZTS is a vital semiconducting material …

The combination of ZnO nanotubes and SnS nanoparticles in core-shell nanoarchitectures
has potential advantages for photoelectrochemical applications due to increased …

In this paper, we present an optimized procedure for depositing SnS thin films using the
rapid S-SILAR technique. We also analyze the effects of deposition cycles and post …

Antimony selenosulfide (Sb2 (S, Se) 3) has been emerging as a promising light absorber
owing to its tunable bandgap (1.1–1.7 eV), high absorption coefficient (> 105 cm− 1), and …

Tin sulfide (SnS) thin films were galvanostatically electrodeposited on glass/Indium-Tin
Oxide (ITO)/Cadmium Sulfide (CdS) substrates from a non-aqueous solution. The effect of …

A mathematical prediction model was developed to predict the band gap of Sb 2 S 3 films
based on the synthesis parameters. For the optimization of process parameters, a …

In this study, important process parameters in the synthesis of PbS films using a continuous
flow reactor were optimized with a design of experiments approach. Flow rate, circulation …

In this work, SnS films were obtained by the SILAR method at 25 and 50 cycles. These films
were used by the first time in the photocatalysis process to produce H 2 under simulated …