Abstract Stainless steel, Co-Cr and Ni-Cr alloys have played an important role in many
industrial sectors to combat environmental degradation. However, low hardness and poor …

Devices that integrate field effect transistors into microfluidic channels are becoming
increasingly promising in the medical, environmental, and food realms, among other …

It has generally been believed that the formation of the S phase or expanded austenite γ N
with enough thickness depends on the temperature (lower than 480° C) and duration of the …

Книга представляет собой подробное справочное руководство по основам плазменной
химико-термической обработки поверхности стальных деталей. В ней обобщены …

The DLC coatings are chemically inert, have low friction coefficient and good wear
resistance. Depending on H content and sp 3 bonds, they can be classified in “soft” or “hard” …

In this work, three plasma-enhanced techniques have been used to deposit Diamond-like
Carbon coatings (DLCs), as follows: HiPIMS, PECVD, and PIID. The DLCs deposition was …

Austenitic stainless steels exhibit excellent corrosion resistance but relatively poor wear
resistance. Previous investigations have demonstrated that surface treatments consisting of …

An ultra-thick nitrided layer (> 80 μm) was formed by hot wire enhanced plasma-assisted
nitriding of AISI 316L austenitic stainless steel under the higher pulsed bias to investigate …

Plasma nitriding of austenitic stainless steel is of high technological importance due to its
ability to improve the surface hardness, wear and corrosion resistance. Therefore, such …

The aim of this work was to study the influence of thermochemical treatment of ionic plasma
nitriding on the resistance to micro-abrasive wear and to the corrosion process of AISI 316L …