Titanium and its alloys are potential materials for orthopedic implant applications due to their
appropriate biological and mechanical behavior. As biocompatibility and biomechanical …

Abstract The Ti-(0–30) Nb-(2–11) Mo-3.5 Ta (wt.%) alloys with the composition interval of 5.0
wt.% for Nb and 3.0 wt.% for Mo were prepared by hot isostatic pressing. The Ti–Nb–Mo–Ta …

The static softening behavior and dislocation density evolution of TA15 titanium alloy during
double-pass hot deformation were investigated under the deformation temperatures (910° C …

Titanium-tantalum alloys with lamellar microstructure were fabricated by cold isostatic
pressing under 400 MPa and pressure-free sintering at 1600° C. By such a low-cost powder …

Metals that come into contact with the body can cause reactions in the body, so biomaterials
must be tested to avoid side effects. Mo, Zr, and Ta are non-toxic elements; alloyed with …

The development of Ti-based alloys with improved properties for medical applications is a
challenge nowadays in the field of materials engineering. In this study, the color of oxide …

β-type titanium alloys with a body-centered cubic structure are highly useful in orthopedics
due to their low elastic modulus, lower than other commonly used alloys such as stainless …

In this study, a Ti-32.9 Nb-4.2 Zr-7.5 Ta (wt%) titanium alloy was produced by melting in a
cold crucible induction in a levitation furnace, and then deforming by cold rolling, with …

The simultaneous influence of hydrogen H and ultrasound deformation on internal friction
Q− 1 and dynamic elastic modulus E of intermetallic Ti 3 Al alloy after cutting and polishing …

This study primarily focuses on analyzing anelastic processes due to interstitial oxygen in
the Ti–25Ta–40Zr alloy. From the structural and microstructural characterization (DRX and …