Due to lattice reorientation, grain segmentation, induced recrystallization, twins play a very
important role in regulating texture, refining grains, improving mechanical properties and …

Together with slip, deformation twinning and de-twinning are the plastic deformation
mechanisms in hexagonal close packed (HCP) crystals, which strongly affect texture …

Twinning and shear bands are two main deformation structures in magnesium alloys at low
temperatures, however, the relationship between these two deformation structures is still …

Here, the low-cost submicron La 2 O 3 particle modified by lithium salts as a precursor was
added to Mg–5Li–3Al–2Zn (LAZ532) alloy melt to form in-situ plenty of submicron Al 3 La …

Twinning is widely recognized as an effective and cost-efficient method for controlling the
microstructure and properties of wrought Magnesium (Mg) alloys. Specifically, twins play a …

A remarkable improvement of the stretch formability of rolled Mg–3Al–1Zn alloy at room
temperature was achieved by introducing initial {10–12} twins. The activation of detwinning …

The plastic deformation of an extruded Mg–Al–Mn (AM30) magnesium alloy in the extrusion
direction by compression can be characterized by three distinct stages. Twinning was …

This study demonstrates that cold pre-forging (CPF) conducted before extrusion is a
promising means for improving the mechanical properties of extruded magnesium alloys …

Two extruded magnesium alloys, AZ31 with a bimodal microstructure and ZE10 with a
homogeneous microstructure, were pre-compressed and subsequently subjected to tensile …

In-plane deformation characteristics of rolled Mg–3Al–1Zn alloy, which was previously
compressed along the rolling direction, were investigated by carrying out tension and …