The hydrogen production from natural gas has advantages of low investment, low carbon
emission, and high hydrogen production rate. This paper briefly describes the technical …

In the petrochemical industry, centrifugal cast Fe–Cr–Ni heat-resistant alloy tubes are critical
components that are exposed to severe conditions for long-time service. The life of the alloy …

Heat resistant reformer tubes comprise a significant fraction of petrochemical reforming
plants cost considering their high alloy content (ie 25Cr-35Ni-1Nb-0.1 Ti). The bottom …

This study examined the oxidation properties of rare earth steel at high temperatures (600 C–
900 C) in the air atmosphere by using Scanning Electronic Microscope (SEM) with an …

In this work, the Thermo-Calc software was used to evaluate the effect of the Nb and Mn
additions on the thermal phases stability for a conventional HT heat-resistant austenitic cast …

Failure analysis was conducted for a cracked Incoloy 800H reformer tube serviced at 580℃
in an ammonia installation based on the microstructure observation, fracture analysis …

The effect of the filler metal chemical composition on the performance of Cr35Ni45NbM alloy
weld joint is studied in this paper. The Cr35Ni45NbM alloy weld joints with two type filler …

In this work, a Cr35Ni45Nb alloy tube for use in a reformer furnace is subjected to high
temperature (871° C and 927° C) creep regimes, and the microstructural changes (eg …

The reformer furnace tube in service exposure after local replacement was investigated on
the microstructure and mechanical properties. Experimental results indicate that NbC …

The effect of temperature on the corrosion behavior of VM110SS casing steel in a H 2 S/CO
2 co-existing environment was investigated by high temperature and high pressure (HTHP) …